Chapter 12
Strapping machines feed plastic (PP/PET) strap around a load, tension it, heat-seal the overlap and cut off. The strap feed/tension track, the sealing unit (heated blade) and the coil feed are the service-critical systems; most faults are strap-feed or heater related.
| Model | Type | Notes |
|---|---|---|
| YS-305B/BP/X · YS-405/B/BD/BL | Semi & automatic, side/frame variants | By strap width & load |
| YS-605/P/R/RP/RPD · YS-612 | Fully automatic / high-frame & side-seal | Pallet & heavy loads |
| YS-A2C/A2F/A2L · YS-LX-500/D · YS-SZ90 · YS-SO | Automatic & special-frame strappers | Inline & low/large frames |
| KZ-101 / KZ-102 · fully automatic · through-eye | Semi, automatic & pallet (vertical) strappers | Box & pallet strapping |
| Freq. | Task | Standard |
|---|---|---|
| D | Clear strap dust from track, feed unit and sealing area | No swarf build-up |
| D | Check coil loading, strap threading and heater temperature | Free feed; seals hold |
| W | Clean arch/track flaps; inspect feed rollers and tension | Strap feeds full loop |
| M | Lubricate per chart (keep oil off strap/seal); check heater blade | NLGI #2; clean fusion |
| Q | Inspect/replace feed rollers, heater, track flaps and knives | Per wear list |
| A | Gearbox/motor, full electrical & safety check | Per annual tasks |
| Symptom | Likely cause | Remedy |
|---|---|---|
| Strap fails to feed around arch | Track flap open/misaligned, feed rollers worn, strap set wrong | Reset/clean track; replace rollers; rethread |
| Seal fails / strap pulls apart | Heater temp, worn blade, insufficient fusion time/pressure | Set heater; replace blade; adjust cycle |
| Strap won’t tension / loose load | Tension setting, worn tension rollers, strap grade | Increase tension; replace rollers; use correct strap |
| Strap jams in feed | Coil tangle, worn guides, curled/poor strap | Re-fit coil; clean guides; use quality strap |
| Machine cycles but no cut | Knife/cam timing, worn cutter | Re-time; replace knife |
| Heater not warming | Heater element, thermofuse, wiring | Replace element/check fuse; call electrician |
We use cookies to operate the site, analyse traffic and support your inquiries. You can accept all cookies or manage your choices. See our Privacy Policy and Cookie Policy.