Sales: [email protected] · WhatsApp +86 136 4542 9121 — CE-certified packaging machinery since 2008
SunAura Packaging Machines

Case Sealer Maintenance & Service Guide (Carton Taping)

Precision packaging machinery, engineered and built in Qingdao, China since 2008.

Chapter 10

Case Sealer Maintenance & Service Guide (Carton Taping)

Case sealers fold the top flaps and apply tape to the top and bottom center seams as the case passes through driven side belts. Uniform, wrinkle-free taping depends on the tape head (blade and rollers), correct case-width/height settings and steady belt drive.

Catalog p.16–19Tape headSide drive beltsFlap foldersUniform & random (FX/FH)

Models covered

Model Type Notes
YS-501D / 501X · YS-502 / 502D · YS-601AW Semi & fully automatic sealers Uniform & random case sizes
FA500 Semi-automatic Manual flap fold, fixed sizes
FX500 Automatic uniform sealer Fixed case size, high rate
FH500L · L-type corner-edge · cross sealer Corner/edge & H-type sealing Adds edge strips for heavy loads
E-commerce / SCJF-500 variants Small-parcel & corner-edge Light, variable parcels

Maintenance schedule (add to master schedule)

Freq. Task Standard
D Clean tape head, rollers, side belts and folders of adhesive/dust No build-up
D Check tape threading and tension; verify cases feed square Smooth tape application
W Inspect serrated blade and pressure rollers; side-belt condition/tension Clean cut; belts grip
M Lubricate drive bearings and adjust belt tension; check leg/rollers NLGI #2; cases driven evenly
Q Replace blade/rollers and worn side belts pre-emptively Per wear list
A Gearbox/motor, full mechanical & guarding inspection Per annual tasks

Wear parts

  • Tape head: serrated cutting blade, application/pressure rollers and tape feed rollers**, core brake and tension spring.
  • Side drive belts (and their tension), flap-folder wheels, conveyor/table rollers, leg-height locks.
  • Corner-edge machines: additional edge tape heads and folding guides.

Troubleshooting

Symptom Likely cause Remedy
Tape won’t cut / trails Dull blade, tape tension, head timing Replace blade; set tension; check head
Tape wrinkled / off-center Head alignment, roller pressure, case not square Align head; clean rollers; guide case
Tape tails uneven Head height, roller/tension setting Set head height and tension
Cases jam / won’t feed Width/height set wrong, worn side belts, flap fold Re-set changeover; replace belts; check folders
Top flaps not folded Folder adjustment, case variation on random model Adjust flap folders; confirm random-capable model
Slipping / case stalls mid-seal Worn/loose side belts, low drive tension Tension or replace belts
WHEN TO CALL SUNAURAOperator-level: tape threading, blade/roller change, changeover, cleaning. Call service for drive/gearbox faults, repeated mis-feed on correct settings or edge-sealing head timing.