Chapter 09
Cartoners erect a folded carton, load the product (manual, automatic or with a bucket infeed) and close/tuck or glue the flaps. They combine a carton blank pickup, a flighted chain, flap-opening guides and a closing or gluing station — timing between these is the heart of the machine.
| Model | Type | Typical application |
|---|---|---|
| ZH-200 | Intermittent cartoner | Pharma, food, small goods cartons |
| ZH-250P | Automatic servo cartoner | Higher-speed, fast changeover |
| Freq. | Task | Standard |
|---|---|---|
| D | Clean flights, guides, pickup and closure stations | No paper dust/glue build-up |
| W | Inspect vacuum cups, chain tension and flap guides | Cups good; correct chain tension |
| M | Lubricate main chain, cam and bearings; check timing | NLGI #2; synchronized stations |
| M | Hot-melt: clean nozzle/tank, check temperature; tuck: check guides | Clean glue; flaps fold cleanly |
| Q | Replace cups, worn chain/belts and closure tooling as needed | Per wear list |
| A | Gearbox, full cam timing, electrical and program backup | Per annual tasks |
| Symptom | Likely cause | Remedy |
|---|---|---|
| Carton not erected / opens late | Vacuum pickup, flap guides, magazine setting | Replace cups; adjust guides/magazine |
| Product won’t load / jams at push | Carton not square, timing offset, product oversize | Re-time load; check carton/product size |
| Flaps not closing / poor tuck | Guide wear, mis-adjusted tuck fingers, glue fault | Adjust/replace guides; check glue |
| Glue failure / stringing | Temperature, nozzle, adhesive grade, char | Set temp; clean nozzle; correct adhesive |
| Chain stalls / overload | Jam, chain tension, worn sprockets | Clear jam; tension/replace chain |
We use cookies to operate the site, analyse traffic and support your inquiries. You can accept all cookies or manage your choices. See our Privacy Policy and Cookie Policy.