Chapter 11
Labelers apply pressure-sensitive labels to containers using a peel edge, a driven label web and a wrap/wipe or tamp station. Label placement accuracy is a function of the dispense timing, container handling, label-roll setup and a clean peel surface.
| Model | Type | Notes |
|---|---|---|
| YTB-A2000 | Fully automatic wrap labeler | Round containers, front/back options |
| YTB-B2000 | Fully automatic, up-rated | Larger/taller containers, higher speed |
| Freq. | Task | Standard |
|---|---|---|
| D | Clean peel edge, rollers, wrap station and product sensor | No adhesive residue |
| W | Check label web threading, backing take-up and roller condition | Smooth feed, no tears |
| M | Lubricate where specified; check dispense timing and label sensor | Accurate placement |
| Q | Inspect drive belt/stepper, rollers and sponge/wipe pads | No wear; firm wipe |
| A | Full drive/electrical check and parameter backup | Per annual tasks |
| Symptom | Likely cause | Remedy |
|---|---|---|
| Labels not separating at peel | Peel edge worn, label too thin, web tension | Replace edge; adjust tension; check labels |
| Wrinkled / bubbled labels | Wipe pressure, container speed match, surface condition | Adjust wipe; sync speed; dry/clean containers |
| Placement offset / skewed | Dispense timing, guides, sensor setting | Re-time; center container; set sensor |
| Double labels / no label | Gap sensor dirty/mis-set, label web | Clean/set gap sensor; rethread web |
| Web tears / jams | Over-tension, sharp edge, misaligned rollers | Set tension; smooth edge; align rollers |
We use cookies to operate the site, analyse traffic and support your inquiries. You can accept all cookies or manage your choices. See our Privacy Policy and Cookie Policy.