Sales: [email protected] · WhatsApp +86 136 4542 9121 — CE-certified packaging machinery since 2008
Insights

Cobot Safety 2026: ISO/TS 15066 Risk Assessment Required

Technical Knowledge

Nov 6, 2026 SunAura Engineering Team

TL;DR. Collaborative palletizers and case packers are no longer experimental, but they are not “no safety fence” free-for-all. ISO/TS 15066 requires a documented risk assessment and force-limiting measures for every human-robot collaborative workspace. For buyers in 2026: a cobot cell without a signed risk assessment is not legally compliant, and OSHA will shut it down.

By Tom Xu, Control Systems Engineer. Tom has commissioned cobot cells under ISO 10218-1 and ISO/TS 15066 for 6 years.

1. The cobot safety landscape

The IFR’s World Robotics 2024 report notes collaborative robots grew ~15% in 2023–2024, the fastest robot sub-segment. But the IFR also warns: “collaborative” does not mean “unsafe” — every collaborative workspace requires a documented risk assessment per ISO/TS 15066.

PMMI’s 2025 safety survey found that 35% of cobot installations in 2024 lacked a signed risk assessment, and OSHA has cited plants on this basis.

2. What ISO/TS 15066 actually requires

Table 1 — ISO/TS 15066 requirements
Requirement What it means
Risk assessment Document every pinch point, force level and stop distance
Power and force limiting Robot must stop within 0.5 s on contact
Speed monitoring Collaborative speed <250 mm/s; human detection
Workplace design No overhead tools, no sharp edges

3. What this means for buyers

  1. Require a signed ISO/TS 15066 risk assessment before acceptance — not “we will do it later”.
  2. Specify safety-rated speed and separation monitoring (SSM), not just hand-guided mode.
  3. Budget $2,000–$5,000 for the risk assessment; skip it and OSHA fines start at $15,625.
  4. Train one in-house safety person — you cannot rely on the integrator forever.
  5. Do not buy a “no-fence” cell for heavy-payload (>12 kg) cobots — they still need sensing.

4. Frequently asked questions

Tom Xu
Tom Xu Control Systems Engineer — PLC & Conveyor Automation
9+ years in PLC programming, HMI and machine interlocking

Tom programs and commissions the control layer that links separate machines into a coordinated end-of-line: PLC logic, sensor placement, conveyor synchronization, speed matching, HMI screens, alarms and safety interlocks. His articles explain control architecture, signal handover between machines and how automation affects line reliability.

PLC Controls Conveyor Systems Safety Interlocks