TL;DR. Collaborative palletizers and case packers are no longer experimental, but they are not “no safety fence” free-for-all. ISO/TS 15066 requires a documented risk assessment and force-limiting measures for every human-robot collaborative workspace. For buyers in 2026: a cobot cell without a signed risk assessment is not legally compliant, and OSHA will shut it down.
By Tom Xu, Control Systems Engineer. Tom has commissioned cobot cells under ISO 10218-1 and ISO/TS 15066 for 6 years.
1. The cobot safety landscape
The IFR’s World Robotics 2024 report notes collaborative robots grew ~15% in 2023–2024, the fastest robot sub-segment. But the IFR also warns: “collaborative” does not mean “unsafe” — every collaborative workspace requires a documented risk assessment per ISO/TS 15066.
PMMI’s 2025 safety survey found that 35% of cobot installations in 2024 lacked a signed risk assessment, and OSHA has cited plants on this basis.
2. What ISO/TS 15066 actually requires
| Requirement | What it means |
|---|---|
| Risk assessment | Document every pinch point, force level and stop distance |
| Power and force limiting | Robot must stop within 0.5 s on contact |
| Speed monitoring | Collaborative speed <250 mm/s; human detection |
| Workplace design | No overhead tools, no sharp edges |
3. What this means for buyers
- Require a signed ISO/TS 15066 risk assessment before acceptance — not “we will do it later”.
- Specify safety-rated speed and separation monitoring (SSM), not just hand-guided mode.
- Budget $2,000–$5,000 for the risk assessment; skip it and OSHA fines start at $15,625.
- Train one in-house safety person — you cannot rely on the integrator forever.
- Do not buy a “no-fence” cell for heavy-payload (>12 kg) cobots — they still need sensing.
