Sales: [email protected] · WhatsApp +86 136 4542 9121 — CE-certified packaging machinery since 2008
Insights

Strapping Machine Buying Guide 2026: PP vs PET, Manual vs Auto

Technical Knowledge

Nov 8, 2026 SunAura Engineering Team

TL;DR. A strapping machine in 2026 costs $1,500 (manual hand sealer) to $45,000 (fully automatic inline). The choice between manual, semi-automatic and automatic strappers depends on strap material (PP vs PET), throughput and whether you strap pallets or cases. This guide compares all three, PP vs PET, and the TCO over 5 years.

By Sarah Liu, Materials Engineer. Sarah has tested PP and PET strapping on 50+ production lines and tracks banding vs strapping trends.

1. Why strapping still matters

Strapping secures cases on pallets and bundles units together. PMMI’s 2025 secondary packaging survey notes that strapping remains the #1 secondary securing method for palletized loads, even as stretch wrapping grows. Statista’s packaging materials data shows PP and PET strapping demand growing ~3% annually.

2. Three strapper types

Table 1 — Strapper types
Type Speed Price Best for
Manual hand sealer 1–3 straps/min $1,500–$4,000 Low volume, pallet repair
Semi-automatic (table top) 3–8 straps/min $4,000–$12,000 Case bundling, mid volume
Fully automatic inline 8–20 straps/min $20,000–$45,000 High volume, integrated line

3. PP vs PET strap

Table 2 — PP vs PET
Property PP PET
Price per kg $1.80–$2.50 $2.50–$3.50
Break strength 150–300 kg 300–500 kg
Elongation 15–20% 5–10%
Best for Light bundles, cases Heavy pallets, lumber, bricks

4. Decision matrix

Table 3 — Which strapper for you
Your situation Recommended
<3 straps/min, occasional Manual hand sealer
3–8 straps/min, case bundling Semi-automatic table
8–20 straps/min, integrated Fully automatic inline
Heavy loads >500 kg PET strap + automatic

5. Common pitfalls

  1. Using PP on heavy pallets — strap breaks in transit.
  2. Under-sized tension — load shifts.
  3. No strap coil stand — operators fight the coil.
  4. Wrong strap width — 12 mm vs 15 mm does not fit the head.
  5. No spare parts — a $20 part stops a $30k line.

6. Frequently asked questions

Sarah Liu
Sarah Liu Materials Engineer — Film & Strapping Technology
9+ years in stretch film, strapping band and consumable selection

Sarah evaluates packaging consumables against machine capability: film gauge and prestretch, PP versus PET and steel strapping, core width, tension settings and corner board use. Her articles connect film and band choice to machine settings, freight damage rates and total cost per pallet, rather than recommending the cheapest consumable on paper.

Stretch Film Strapping Packaging Materials