Case Erector Buying Guide 2026: Random-Size vs Fixed-Size, Pneumatic vs Servo, Pricing and ROI
A case erector is the first machine in the secondary packaging flow. It pulls a flat corrugated blank from the magazine, opens it into a rectangular case, squares the flaps, and seals the bottom before the case moves to the case packer, case sealer, conveyor and palletizer downstream. When the erector jams, every machine after it waits. When it misses a seal, the case rocks on the conveyor and can knock over a full layer further down the line. For that reason, choosing the right case erector is less about the sticker price and more about matching the machine to your case mix, your shift pattern, your floor space and your labor budget.
This 2026 buying guide walks a procurement or engineering buyer through the decisions that actually move the needle: random-size versus fixed-size case handling, pneumatic versus servo drive, tape versus hot-melt bottom sealing, magazine capacity, changeover time, case size ranges, speed in cases per minute, price bands, strengths and limits, and the labor and downtime math behind payback. It is written for buyers who need to compare quotes on technical merit rather than sales language. Related background can be found in our case erector manufacturer and supplier buyer guide, and for the machine that closes the top after packing, see the case sealer buying guide.
1. Buyer Segmentation: Who Needs Which Case Erector
Before comparing machines, sort your operation into a segment. The segment determines the machine class, the drive type, the magazine size and the budget range that makes sense. Buyers who skip this step usually overbuy a high-speed machine that runs half-idle, or underbuy a fixed-size machine that cannot handle the SKU growth planned for the next two years.
Six inputs define the segment: daily output in cases, case dimensions and blank quality, case or product load weight, available floor space, total budget, and the automation level you can staff and maintain today. Daily output should be calculated at steady production, not the catalog peak speed of the machine you saw in a video. Case dimensions matter because a machine that physically cannot accept your smallest or largest blank cannot be fixed with a recipe change. Load weight matters for the downstream conveyor and packer interface more than for the erector itself, but it changes the case board grade and therefore the blank stiffness the erector must feed.
| Buyer segment | Daily output | Case specs | Floor space | Budget band | Automation level | Recommended class |
|---|---|---|---|---|---|---|
| Small workshop / seasonal packer | 300–1,500 cases/day | 1–3 fixed RSC sizes, light board | 2–3 m² | Low | Semi-automatic, one operator assists | Semi-automatic fixed-size erector |
| Mid-volume producer, stable SKU list | 1,500–6,000 cases/day | 3–6 sizes, consistent board grade | 3–5 m² | Mid | Automatic, attended line | Automatic vertical fixed-size, pneumatic or basic servo |
| E-commerce fulfillment / mixed SKU warehouse | 3,000–15,000 cases/day | 8–30+ random sizes, variable board | 4–7 m² | Mid to high | Automatic random-size, recipe changeover | Servo random-size erector, wide size range |
| High-volume single-SKU production line | 10,000+ cases/day, multiple shifts | 1–2 sizes, heavy board, stable supply | 5–8 m² | High | Fully automatic, high-speed cycle | High-speed horizontal or vertical servo erector |
| Integrated end-of-line project | Depends on upstream rate | Case list defined by packer and palletizer | Engineered layout | High, line-level budget | Fully automatic, PLC handshake with conveyor and palletizer | Erector matched to packer and sealer by the integration scope |
If you are unsure which segment fits, start from the number of distinct case sizes you run per week and the number of changeovers per shift. That pair of numbers separates fixed-size machines from random-size machines more reliably than output alone.
2. Random-Size vs Fixed-Size Case Erectors
The first major split in a quote is whether the machine handles a fixed-size case family or a random mix of sizes without manual tooling changes. The two names refer to how the forming shoulders, squaring bars and bottom-seal belt adjust between cases.
Fixed-size case erector
Principle: The forming funnel, squaring guides and seal path are set to one case size (or a narrow band of closely related sizes) during installation. Different sizes require manual adjustment of rails, guides and stops, usually with hand tools and a measured setup sheet.
Best duty: Stable SKU lists, repeated production runs, high uptime on one size, food and consumer-goods lines with a narrow case range.
Strengths: Lower purchase price, simpler pneumatics, fewer moving servo axes, easier maintenance for a small maintenance team, consistent seal quality on the target case.
Limits: Every size change costs setup time; a size outside the mechanical range cannot be run at all; inventory of spare format parts grows with the SKU list; changeover errors show up as crooked cases and downstream jams.
Random-size case erector
Principle: Servo-driven or motor-adjusted shoulders, squaring arms and belt spacing open to each case size from a recipe stored on the HMI. The machine reads the blank size or receives a recipe selection, then positions the guides before the blank is erected. Some models measure the blank as it feeds and adjust on the fly.
Best duty: E-commerce and distribution centers with a long case list, contract packing that changes SKUs several times per shift, seasonal assortment lines where blanks arrive mixed on the same magazine lane.
Strengths: Recipe-based tool-free changeover, wide physical size range on one machine, lower setup labor per shift, consistent case forming across mixed sizes, easier to add future SKUs.
Limits: Higher capital price, more servo axes and parameter tuning required, periodic calibration of guide positions, more dependence on the control software and on a supplier who can update recipes, higher annual maintenance spend.
The practical dividing line: if you run more than two or three case sizes and change over more than once per shift, the labor lost to fixed-size changeovers usually outweighs the premium paid for random-size servo adjustment. If you run one size all week and rarely touch a second blank size, a fixed-size machine will cost less and break less often.
3. Pneumatic vs Servo Drive Systems
After deciding fixed or random, the next split is how the machine moves: compressed-air cylinders (pneumatic) or electric servo motors with drives (servo). The drive choice shapes speed, repeatability, changeover, noise, maintenance and price.
| Parameter | Pneumatic drive | Servo drive |
|---|---|---|
| Motion principle | Air cylinders extend and retract against mechanical stops; speed set by flow valves | Servo motors position axes to programmable coordinates with encoder feedback |
| Repeatability | Good for a fixed stop position; sensitive to air pressure fluctuations and cylinder wear | High repeatability on every cycle, positions held by encoder feedback |
| Changeover | Mechanical: loosen, measure, reset stops and rails; 15–40 minutes typically | Recipe on HMI: guides move to stored coordinates; under 5 minutes on well-built machines |
| Speed range | Common 10–25 cases/min; fine for steady mid-volume fixed-size duty | Common 15–50+ cases/min; high-speed models reach 60–80 cases/min |
| Noise and air quality | Cylinder cycling and venting add noise; requires clean, dry compressed air at stable pressure | Quieter cycle; still uses air for suction cup vacuum and some clamps, but fewer main motion cylinders |
| Maintenance | Replace seals, filters, solenoid valves and cylinders over time; simple parts, low skill demand | Servo motors, drives, belts, reducers and encoder cables; needs control-savvy maintenance or supplier support contracts |
| Capital price | Lower | Higher, roughly a 40–90% premium over a comparable pneumatic fixed-size model at the same throughput |
| Main pros | Cheap to buy, easy to repair, robust on simple cycles | Programmable changeover, smooth acceleration, coordinated multi-axis motion, data on HMI |
| Main limits | No programmable positioning, slow to change size, wear tied to air quality | Higher purchase and service cost, software dependency, more components that can fault |
A mixed architecture is common on mid-tier machines: servo for the random-size guide positioning, pneumatics retained for the suction cup vacuum circuit and simple clamping actions. When comparing quotes, ask the supplier to list which axes are servo and which are pneumatic rather than accepting a blanket phrase like “servo-driven machine.”
4. Multi-Machine Horizontal Comparison
The table below compares the main case erector classes a buyer will meet in 2026 quotations. Speeds, capacities and price bands are labeled market reference ranges for 2026 base machines in USD; they are not quotes for any specific deal. Installation, conveyors, safety guarding and custom tooling add cost on top.
| Machine class | Principle | Suitable duty | Capacity / magazine | Speed (cases/min) | Market reference price band (USD) | Pros | Limitations |
|---|---|---|---|---|---|---|---|
| Semi-automatic fixed-size | Operator places blank in station; machine opens, squares and seals bottom; operator removes case | Small batches, seasonal peaks, pilot lines | Manual blank feed, small side magazine | 5–10 | $5,000–$15,000 base | Low capital, small footprint, simple operation | Operator-paced, no hands-free production, fixed size range |
| Automatic vertical fixed-size, pneumatic | Vertical blank feed, suction lift, forming funnel, pneumatic squaring, tape or glue bottom seal | Mid-volume single-SKU food, household and hardware packing | 100–150 blank magazine; refill 1–2 times per shift at mid speed | 10–25 | $12,000–$28,000 base | Reliable cycle, low maintenance, standard tape head, well-known controls | Manual size changeover, narrow size window, air pressure dependent |
| Automatic random-size, servo adjustment | Servo-positioned guides and squaring arms follow stored recipes; automatic blank feed and seal | E-commerce, contract packing, mixed-size distribution | 150–300 blank magazine; optional automatic magazine replenishment | 12–35 | $25,000–$55,000 base | Tool-free changeover, wide size range, HMI recipe library, less setup labor | Higher price, servo service dependency, calibration after long idle periods |
| High-speed horizontal servo erector | Horizontal blank transfer with synchronized servo belts; continuous forming and bottom sealing | High-volume single-SKU lines, unstable or tall cases, multi-shift production | Large floor-level magazine, automatic feed | 35–80 | $55,000–$120,000+ base | High cycle rate, stable handling of tall or weak cases, coordinated line speed | Large footprint, high ceiling and foundation needs, engineering-heavy integration |
| Erector integrated with case packer station | Shared frame, common conveyor and PLC; erector feeds directly into the packing station | Planned end-of-line projects where erector, packer and sealer share one controls scope | Matched to packer cycle | Matched to upstream rate, typically 15–40 | $35,000–$90,000 base before line conveyors and guarding | Single-vendor interface, fewer handshakes, tighter floor layout | Less flexibility to re-arrange later, interface engineering required, lead time longer |
5. Tape vs Hot-Melt Bottom Seal
Two methods close the bottom flaps on the erected case: pressure-sensitive tape and hot-melt adhesive. The choice affects consumables cost, seal security, line speed and daily maintenance.
Tape sealing routes a tape strip across the bottom flap seam through a tape head with a cutter and pressure belts. Tape is the default for most RSC cases at speeds under 30 cases per minute. Consumables are standard carton tape rolls; maintenance is blade replacement and tape head cleaning. Seal reversal and reopening are straightforward, which suits distribution and e-commerce where carriers and recipients later open the top. Limits: tape can lift on very heavy cases, cold warehouse temperatures reduce adhesion, and a worn blade causes tape tails and flagging on the seal.
Hot-melt sealing melts adhesive in a heated tank, dispenses bead patterns onto flaps, and folds them under pressure while the adhesive sets. It suits high-speed lines, irregular case shapes, heavy cases and export shipments where a rigid closed bottom reduces case flex in container stacking. Limits: glue tank temperature control, nozzle cleaning between runs, adhesive stickiness affected by cold environments, and a recurring consumables budget for glue sticks or pellets. Maintenance time rises relative to tape, and a clogged nozzle during production can stop the erector quickly.
| Seal method | Best speed band | Case type fit | Consumables reference cost | Maintenance burden |
|---|---|---|---|---|
| Pressure-sensitive tape | Up to ~30 cases/min reliably; higher on dedicated tape heads | Standard RSC, light to medium cases, e-commerce returns flow | Standard tape rolls, low recurring spend per case | Blade and roller checks; minutes per shift |
| Hot-melt glue | High-speed and irregular shapes, 30+ cases/min environments | Heavy cases, export cartons, irregular or reinforced blanks | Glue consumables commonly in the low thousands of USD per year for a working line, supplier-dependent | Tank warm-up, nozzle cleaning, filter and bead-pattern checks; more scheduled maintenance time |
6. Configuration-to-Application Matching Table
Use this table to translate your product, speed, case size, material and environment into a recommended machine configuration. If your row spans more than one scenario, the conservative configuration is the one shown first.
| Product / application | Target speed | Case size range | Board / material | Environment | Recommended configuration |
|---|---|---|---|---|---|
| E-commerce parcels, mixed SKU assortment | 12–30 cases/min | Wide range, 150–600 mm length on the long side | Variable light to medium corrugated, occasional warped blanks | Ambient warehouse, frequent recipe changes | Servo random-size vertical erector, positive suction blank feed, large magazine, tape bottom seal, HMI recipe library |
| Packaged food in uniform cartons | 15–25 cases/min | 3–5 fixed sizes | Consistent food-grade corrugated, regular blank supply | Ambient or conditioned production room, washdown-adjacent area | Automatic vertical fixed-size pneumatic erector, stainless contact panels where required, tape or hot-melt per case weight |
| Building materials, hardware, heavy cases | 8–18 cases/min | Medium to large fixed sizes, thick board | Heavy double-wall or reinforced corrugated, stiff blanks | Dustier workshop floor, possible ambient temperature swings | Reinforced frame and suction circuit, hot-melt bottom seal for rigid closure, dust-protected sensors, heavy-duty magazine guide |
| Export container shipments, palletized export cartons | 10–22 cases/min | Stable export case list, standard pallets | Medium to heavy board, cases must hold stack load in containers | Production room feeding stretch wrapping and loading | Fixed or narrow-band servo erector with hot-melt or reinforced tape, level case exit conveyor, sealed bottom verified before packing |
| High-volume single-SKU production, three shifts | 35–70 cases/min | One dominant size, one spare size | Stable premium board grade from a qualified supplier | Planned production line with dedicated maintenance | Horizontal or high-speed vertical servo erector, automatic magazine, glue or heavy-duty tape, PLC handshake to packer, sealer and palletizer |
| Small batch maker, startup, seasonal order peaks | 5–10 cases/min | One or two small sizes | Light to medium board | Shared production space, limited maintenance staff | Semi-automatic fixed-size erector with basic tape seal; upgrade path planned if volume grows past 1,500 cases per day |
7. Magazine Capacity, Changeover Time, Size Range and Speed
Four specification gaps between quotes cause more regret than the headline price.
Magazine capacity. Count how many blanks the magazine holds and divide by your cases per hour. A 100-blank magazine at 20 cases per minute empties in about five minutes of running, which is unrealistic for attended production. Mid-volume machines should carry 150–300 blanks so an operator can refill between runs; high-volume lines should use an automatic replenishment magazine or floor-level blank feed. Ask how long a refill takes and whether one person can do it without stopping the cycle.
Changeover time. Get the actual measured changeover from one size to the next on a machine of the same class, not a theoretical number. Pneumatic fixed-size machines typically require 15–40 minutes of tooled adjustment. Servo random-size machines should change over in under five minutes when the recipe is already stored; the first setup of a new recipe, including physical tooling checks, can take longer. Track changeover frequency in minutes per week: a fixed-size line changed three times per shift at 25 minutes per changeover loses many hours weekly to setup.
Case size range. Measure the inner length, width and depth of every current case plus any planned SKU for the next two years, then confirm the machine’s physical forming range covers the extremes. Do not rely on average size. Check both the blank dimensions and the erected case dimensions; a wide blank that folds into a small case can jam in a narrow funnel.
Speed in cases per minute. Quote speed should be stated at steady cycle on your case blank, with a realistic efficiency allowance. Catalog peak figures assume ideal board, dry air and a warmed-up machine. Multi-SKU lines run at 85–90% of catalog speed once changeovers and minor jams are included. Add a 20–30% margin over your measured hourly demand so the erector is not the bottleneck when the line speeds up.
8. Three-Tier Supplier Identification
Case erectors are sold through three types of seller. The tier of supplier changes what you should verify before placing the order, and how much engineering support you can expect after shipment.
| Supplier tier | Typical structure | Price level | What to verify |
|---|---|---|---|
| Original equipment manufacturer (OEM) | Owns the design, builds and assembles the machine in its own factory, controls controls programming and spare parts inventory | Highest of the three tiers, but direct factory pricing often below Western brands for equivalent specification | Factory audit or live video walkthrough; CE certificate issued by a notified body, not a self-declaration; reference customers in your country or region; test-run video on your exact case dimensions; English-language operation manual and spare parts list; PLC and component brands named in the proposal; warranty and response-time commitment in writing |
| Assembler / trader | Sources frames, drive units and controls from different shops, assembles in its own workshop or commissions assembly, resells under its own name | Middle band; competitive quote, but engineering depth varies widely | Ask who designed the cycle logic and who writes the HMI recipes; confirm component origin names; request the electrical drawings and pneumatic schematics in the delivery package; verify the seller can provide spare parts after the first year; check whether a previous machine was commissioned outside the supplier’s home region |
| Dealer / reseller | Buys finished machines from a builder and resells in a regional market, sometimes adding local delivery and after-sales service | Includes dealer margin; service strength depends on the local team | Confirm the dealer’s service network and response time; ask who holds the spare parts stock; verify the original builder remains available for engineering questions; compare the all-in price with a direct factory quote before deciding; confirm warranty ownership between builder and dealer in writing |
A practical verification checklist applies to every tier: request a factory audit or a live factory video; check the CE certificate number and issuing body; obtain two or three reference customers you may contact; watch a test-run video using your case blank and board grade; confirm the manual, spare parts list and maintenance schedule are delivered in English; ask for the component brands used for motors, cylinders, vacuum valves, tape head and PLC; and confirm the supplier can modify the recipe library for your future SKU list. For more on sourcing machinery internationally, our guide to buying packaging machinery from China covers the same audit points in detail.
9. Price Tiers, Total Cost of Ownership and Payback
The figures below are 2026 market reference ranges in USD for base case erectors, split by tier. They are labeled reference ranges, not transaction prices: a real quote depends on size range, drive configuration, seal method, magazine, guarding, conveyor interfaces, certification and destination freight. Use them to judge whether a proposal sits inside a reasonable band, not to negotiate against a specific closed deal.
| Cost element | Low tier: semi-automatic / basic pneumatic fixed-size | Mid tier: automatic pneumatic or basic servo fixed-size | High tier: random-size servo or high-speed horizontal |
|---|---|---|---|
| Base machine reference price | $5,000–$15,000 | $12,000–$35,000 | $25,000–$120,000+ |
| Installation and commissioning | Usually in-house setup, low external cost; onsite technician visit where needed | Vendor technician or distributor commissioning; installation support commonly several thousand USD | Engineered installation, line integration and operator training; a sizable percentage of base price added for high-speed machines |
| Tooling and change parts | Format guides for the one or two fixed sizes; low one-off cost | Spare guide sets for each fixed size; modest recurring format stock | Servo format parts, optional dedicated seal tooling, future-SKU adjustments |
| Consumables per year | Tape rolls, suction cup wear parts, vacuum filters | Tape or glue consumables, cups, filters, blades; mid annual spend | Glue system consumables where fitted, servo wear parts, higher-volume tape or adhesive; highest recurring spend |
| Maintenance per year | Light, in-house mechanics; limited spare stock | Scheduled pneumatics and belt service; standard annual maintenance hours | Servo inspection, reducer and belt checks, control backups; possible service contract |
| Labor interaction | Operator attends every cycle; labor cost per case highest | One operator monitors refill and changeover; shared across the line | Minimal direct labor; setup labor saved by recipe changeover on mixed-SKU lines |
| Indicative 5-year TCO posture | Lowest purchase price, highest labor share; TCO dominated by operator time | Balanced purchase, consumables and modest maintenance; typical steady-state TCO | Highest upfront cost, lowest per-case labor and setup loss; TCO advantage appears on mixed-SKU and high-utilization lines |
Preventive maintenance planning directly affects the downtime side of the TCO equation. Our packaging machine preventive maintenance checklist lists the daily, weekly and quarterly inspections that keep suction circuits, tape heads and guide positions within specification.
10. RFQ: Ten Questions to Ask Every Supplier
- What is the exact minimum and maximum case length, width and depth the machine physically forms, and which blank sizes were tested in that range?
- What is the steady speed in cases per minute on our case blank, and what efficiency does the supplier assume for a mixed-SKU production day?
- Which axes are servo and which are pneumatic? List the motor, cylinder, valve, vacuum generator, PLC and tape head or glue system brands and models.
- How long does a size changeover take from recipe recall to a good first case, and how long does it take to set up a new recipe not yet in the library?
- What is the magazine capacity in blanks, how long does refill take, and is automatic magazine replenishment available?
- Does the machine use tape, hot-melt, or both? What consumables are required per case, and what is the annual consumables reference cost?
- What CE certificate or other compliance document is provided, who issued it, and does it cover this specific machine configuration?
- Which spare parts are included in a recommended two-year spare kit, what are the lead times for wear parts, and what is the warranty coverage period?
- How does the machine interface to the downstream case packer, case sealer, conveyor and palletizer: I/O handshake, fieldbus protocol, or shared PLC? Who supplies the interface drawings?
- Can the supplier provide a test run with our actual case blanks before shipment, plus reference customers, an English manual, electrical schematics, pneumatic diagrams and a maintenance schedule?
11. Five Pitfalls to Avoid
- Under-specifying the size range for future SKUs. Buying a fixed-size machine for a SKU list that will grow into double digits usually forces a second machine within two years. Specify the planned range up front, even if a fixed machine covers today’s list.
- Choosing by catalog peak speed. A 40 cases/min machine run on mixed blanks, cold air and occasional board warp may average well below its rating. Require steady-cycle figures on your blank.
- Ignoring blank quality tolerance. Budget corrugated that arrives slightly warped feeds poorly on a low-cost gravity blank station. On variable board supply, specify a positive suction blank feed with a vacuum reservoir.
- Forgetting installation, training and spare parts in the budget. The base price leaves out conveyors, guarding, commissioning, operator training, format tooling and the first spare parts kit. A quote without these lines invites post-order extras.
- Skipping the pre-shipment test run. “We can handle that size” in writing is not evidence. A video of your exact blank running on the actual machine before shipment is the cheapest insurance against a jam-prone installation.
12. Scenario Conclusions
E-commerce warehouse, mixed SKU, frequent dispatch waves
Choose a servo random-size erector with a wide physical size range, recipe-based tool-free changeover, a large blank magazine and tape bottom sealing for easy downstream opening. The capital premium over a fixed-size machine is justified when changeovers occur several times per shift; fixed-size setup labor and misformed-case jams are the main costs this configuration removes. Pair the erector with conveyor lanes and a case sealer planned around variable case heights; more on coordinating those machines is in our end-of-line packaging integration guide.
Food production, stable carton list, conditioned production room
An automatic vertical fixed-size pneumatic erector covers most steady food-packing operations at 10–25 cases per minute. Select stainless contact panels and sealed electrical components for the zone; use tape for light cases and hot-melt where case weight or transport security requires a stronger bottom seal. Keep the supplier’s maintenance schedule tied to the cleaning cycle of the surrounding line.
Building materials and hardware, heavy stiff cases
Specify a reinforced frame, a stronger suction circuit, dust-protected sensors and a hot-melt rigid bottom seal for thick double-wall board. The lower speed demand (8–18 cases per minute) does not justify a high-speed machine, but under-built guides and suction cups will jam repeatedly on stiff heavy blanks. Plan the magazine refill around the physical weight of stacked heavy blanks.
Export container shipping, palletized export cartons
Use a fixed or narrow-band servo erector with a secure bottom seal, level exit conveyor and a case alignment station before packing and stretch wrapping. Cases that flex under container stacking or pallet load develop weak bottoms; the seal method, board grade and exit alignment must be selected for outbound load strength, not just for the production cycle.
Frequently Asked Questions
How much does a case erector cost in 2026?
As labeled market reference ranges, semi-automatic and basic pneumatic fixed-size machines run about $5,000–$15,000 and $12,000–$28,000; mid-tier automatic fixed-size and basic servo models sit in the $12,000–$35,000 band; random-size servo and high-speed horizontal erectors range from $25,000 to over $120,000. Installation, tooling, guarding, conveyors, training and spare parts add to the base figure, and destination freight depends on port and delivery location.
Random-size or fixed-size case erector: which should I buy?
If you run one or two case sizes all week, a fixed-size machine costs less and breaks less often. If you run more than two or three sizes and change over more than once per shift, a servo random-size erector with stored recipes removes repeated tooled setup and reduces setup labor per week. The physical size range of each machine should be checked against your largest and smallest current and planned blank before deciding.
Pneumatic or servo drive: what is the real difference in production?
Pneumatic machines move cylinders against fixed stops, keep the purchase price lower and repair with simple parts, but size changes require mechanical adjustment. Servo machines position axes to programmable coordinates, support recipe changeover, deliver smoother motion and higher potential speed, at a higher capital price and a higher service dependency. Many mid-tier machines combine servo positioning with pneumatic suction and clamping circuits.
Tape or hot-melt for the case bottom?
Tape suits standard RSC cases at moderate speeds, where reopening is expected and consumables stay simple. Hot-melt suits high-speed lines, heavy cases, irregular shapes and export cartons that must resist flex in stacking and container transport. Hot-melt adds glue consumables and nozzle maintenance; tape adds blade and roller upkeep. Choose based on case weight, speed and transport stress rather than preference alone.
What maintenance does a case erector require?
Daily: clear jammed blanks, check vacuum suction and confirm the seal path is clean. Weekly: inspect tape blades or glue nozzles, clean sensors and check guide alignment. Quarterly: lubricate bearings, inspect belt tension and filter the air supply. Annually: replace suction cups, vacuum filters and worn seals according to the manual. A scheduled maintenance plan reduces the jam downtime that drives most TCO losses on an erector.
