Sales: [email protected] · WhatsApp +86 136 4542 9121 — CE-certified packaging machinery since 2008
Secondary packaging & multi-pack wrapping

End-of-Line Bundling & Multi-Pack Flow Wrappers

Servo-driven horizontal flow wrappers (form-fill-seal) that make a sealed pillow or fin-seal pack around solid, regular products — from snack bars and bakery to hardware and disposables — across the SZ and SW series.

Scope note. These are large-format, heavy-duty bundling flow wrappers for secondary packaging — multi-packs, bundled cartons and trayless bundles — not primary-product pillow wrappers. If you are looking for single-product pillow packing bars, snacks and bakery, that is our sister brand SunAura Machinery pillow packaging machines.

21models in the range
1configuration groups
Factory-directSunAura Packaging Machines
Overview

What is a horizontal flow wrapper?

A horizontal flow wrapper — also called a pillow-pack machine, HFFS or fin-seal wrapper — feeds a solid product horizontally through a forming box where film is wrapped around it. A fin wheel makes the longitudinal seam underneath and a rotating knife box seals and cuts the front and back seams, producing a continuous stream of pillow-shaped packs. The film is sealed by heat, so no tray is required for regular products, and the whole process is continuous rather than intermittent.

The SunAura Packaging Machines SZ series is the backbone of the range. The small SZ-100 and SZ-180 are entry machines for single bars and small items; the SZ-280, SZ-350 and SZ-450 are the high-volume bakery and snack frames; the SZ-500/580/601/602 and the W-suffix servo machines (SZ-400W, SZ-750W, SZ-601W, SZ801W) cover wide bags, large products and multi-pack formats, while the SW-60E and reciprocating cutters handle boxed or high products that need a moving-knife seal. The SL-150 trayless wrapper and the SZ-280XS bottom-film shrink wrapper cover the special cases.

Servo count is the shorthand customers use to position the machine — 3-servo for cost-effective steady runs, 4–7 servo for servo cutters, reciprocating knives and rapid changeover. More servo axes mean the seal and cut are driven independently of the film feed, so the machine can change pack length from the screen without changing mechanical parts and can track printed film accurately.

The SunAura Packaging Machines range

The SunAura Packaging Machines flow wrapper lineup

21 horizontal wrappers from compact 3-servo single-product frames to 7–9 servo wide-bag and reciprocating machines for multi-packs and boxed goods.

Horizontal flow wrappers (枕式包装机)21 models

ModelConfiguration / typical application
Intelligent 7-Servo Reciprocating Horizontal Flow Wrapper SZ-5800W Intelligent 7-Servo Reciprocating Horizontal Flow Wrapper View machine →
Intelligent 4-Servo Horizontal Flow Wrapper SZ-5800 Intelligent 4-Servo Horizontal Flow Wrapper View machine →
6-Servo Intelligent Horizontal Flow Wrapper SZ-400W 6-Servo Intelligent Horizontal Flow Wrapper View machine →
6-Servo Wide-Bed Intelligent Flow Wrapper SZ-750W 6-Servo Wide-Bed Intelligent Flow Wrapper View machine →
3-Servo Horizontal Flow Wrapper SZ-100 3-Servo Horizontal Flow Wrapper View machine →
Compact Horizontal Flow Wrapper SZ-180 Compact Horizontal Flow Wrapper View machine →
Long-Bed Horizontal Flow Wrapper SZ-180L Long-Bed Horizontal Flow Wrapper View machine →
Horizontal Flow Wrapper SZ-280 / 280W Horizontal Flow Wrapper View machine →
3-Servo Intelligent Flow Wrapper SZ-350 3-Servo Intelligent Flow Wrapper View machine →
3-Servo Intelligent Flow Wrapper SZ-450 3-Servo Intelligent Flow Wrapper View machine →
Full-Servo Reciprocating Flow Wrapper SW-60E Full-Servo Reciprocating Flow Wrapper View machine →
Horizontal Flow Wrapper SW60X/SW80X Horizontal Flow Wrapper View machine →
Large-Product Horizontal Flow Wrapper SZ-3000 Large-Product Horizontal Flow Wrapper View machine →
6-Servo Flow Wrapper SZ-501 6-Servo Flow Wrapper View machine →
5-Servo Flow Wrapper SZ-580 5-Servo Flow Wrapper View machine →
Large-Bag Horizontal Flow Wrapper SZ-601/801W Large-Bag Horizontal Flow Wrapper View machine →
Horizontal Flow Wrapper SZ-602/602W Horizontal Flow Wrapper View machine →
9-Servo High-Speed Flow Wrapper SZ-601W 9-Servo High-Speed Flow Wrapper View machine →
7-Servo Reciprocating Large-Bag Flow Wrapper SZ801W 7-Servo Reciprocating Large-Bag Flow Wrapper View machine →
Bottom-Film Shrink Flow Wrapper SZ-280XS Bottom-Film Shrink Flow Wrapper View machine →
Trayless Horizontal Flow Wrapper Sl-150 Trayless Horizontal Flow Wrapper View machine →
Selection guide

How to choose a flow wrapper

Start with the product and the pack, then the automation level and the in-feed.

01

Product dimensions and pack length

The forming box and the film width are set by the product. Small bars use the SZ-100/180; bakery and standard products use the SZ-280/350/450; wide or tall multi-packs and boxed goods require the SZ-601/801W or the large SZ-3000.

02

Servo count and changeover

Choose a 3-servo machine for a fixed product run at steady speed; choose 4–7 servo frames when pack length and film change often, when running printed film, or when you need a reciprocating knife for high or boxed products.

03

Solid, regular product — and the in-feed

Flow wrap needs a regular, pushable product. Hand feeding works for batches, but most production lines add an in-feed conveyor or an automatic aligning feeder (such as the WX160 random aligner) so the machine is not starved.

04

Film type and seal

Plain or printed laminated film, cold-seal for chocolate and heat-sensitive products, or shrink film on the SZ-280XS. The sealing jaws and temperature are matched to the film, so specify the film structure early.

05

Required output and line balance

The wrapper is usually the fastest machine in a cell — its speed must be balanced against the feeder, a cooling or denester upstream, and any cartoner or case packer downstream to avoid back-pressure.

06

Atmosphere and shelf life

For bakery and snack products, modified-atmosphere (gas flushing) options extend shelf life; this is specified at build time because it affects the gas bars, dwell and sealing head rather than being a simple add-on.

Flow wrap vs. shrink wrapA flow wrapper makes a sealed pillow-pack from a single film roll around a solid product; a shrink wrapper applies a loose film and then heat-tightens it. Bars, bakery, hardware and disposables are flow-wrapped; trays and multi-packs are usually shrink-wrapped.
Who uses them

Where SunAura Packaging Machines flow wrappers run

Bakery & snacksbread, bars, cakesChocolate & confectionerycold-seal capableBiscuits & crackershigh-speed linesInstant food & noodlesmulti-packsDisposable itemsgloves, masks, wipesHardware & stationerylong, regular shapesMedical & daily-usesealed hygiene packsHotel & catering amenitiessingle-serve

Flow wrappers are the most common first packaging machine for solid food and non-food products; the same frame is sold into bakery and industrial disposables with different films and in-feeds.

Buyer questions

Frequently asked questions

What products can be flow wrapped?

Any solid, regular product that can be pushed into the forming box and sealed on the fly — bakery, bars, biscuits, chocolate, instant noodles, disposable items, hardware and single-serve amenities. Liquids, powders and loose granulates are not flow-wrapped; they need a VFFS or filling machine.

What does the number of servos mean?

The servos independently drive the film feed, the end-seal jaws and the cutter. A 3-servo wrapper is economic and reliable for a fixed product; a 4–9 servo wrapper drives the cut and film independently, enabling reciprocating knives, on-the-fly length changes and precise printed-film registration.

What is a reciprocating knife and when do I need it?

A reciprocating (box-motion) cutter moves with the product while it seals, so it can handle tall or boxed products that would otherwise hit a rotating jaw at high speed. The SW-60E and the W-suffix servo frames are the reciprocating options in the lineup.

Can the machine run printed film?

Yes. The servo frames register printed film by aligning a mark on the film with the cut position, and can change pack length from the HMI. Plain film is the default; provide the repeat length and film structure when quoting.

Do I need an automatic feeder?

For continuous production, yes — a hand-fed wrapper is limited by the operator. In-feeds, aligning feeders (such as the WX160), denesters and belt conveyors are chosen to match the product and keep the wrapper at its rated speed; we can supply the whole line, not just the wrapper.

Send a sample and we will size the wrapper

Tell us the product dimensions, required pack length, output and film. We will match the SZ or SW frame, recommend the in-feed and confirm the line speed end to end.