Sales: [email protected] · WhatsApp +86 136 4542 9121 — CE-certified packaging machinery since 2008
Insights

Palletizing load pattern 2026: interlock, column, pinwheel and brick patterns for stable, space-efficient pallets

Technical Knowledge

Nov 14, 2026 SunAura Engineering Team

TL;DR. When a palletizer cell is planned, most attention goes to robot family, payload and reach, but the layer pattern decides whether the load holds together after the cell. Four patterns cover most end-of-line work: column, interlock, pinwheel and brick. Column stacking aligns every box the same direction for fast, dense layers, but the stack slides sideways more easily. Interlock offsets boxes between layers so the layers grip each other, at the cost of slightly more footprint and a more complex program. Pinwheel turns boxes ninety degrees to lock the corners around the perimeter, giving a stable perimeter but leaving a center gap or using more floor space. Brick running bond mixes long and short boxes across layers for an even, stable pack on mixed carton sizes. This guide walks through the buyer segments that choose a pattern deliberately, the four patterns compared on stability, density, speed and equipment fit, a configuration matrix that maps carton shape, load height and containment to a pattern, how the pattern interacts with stretch wrap and strapping, the three supplier channels, the five-year cost picture, the ten questions for the specification, the five pitfalls we see repeat on stacked loads, and the scenario fit for high-volume CPG, mixed-SKU fulfillment, heavy or unstable goods and export pallets. Figures are planning ranges for discussion, not guaranteed cycle times or final prices; actual performance follows your carton dimensions, weight, board rigidity, stack height and reference load.

By Kevin Zhou, Palletizing and Load Stabilization Specialist. Kevin has spent 10 years commissioning conventional layer palletizers, four-axis and six-axis robotic cells and cobot stations, and has audited layer patterns, layer counts, containment and load stability on more than 100 palletizing installations across CPG, beverages, household chemicals and distribution centers.

What a palletizing pattern decides, and why it matters

A palletizing pattern is the arrangement of cartons across each layer and the rotation or offset between layers. The pattern sets how much of each box overlaps the box below, how the weight spreads across the pallet, how well the layers resist sliding and tipping, and how tightly the layer fills the pallet footprint. It also shapes how much the downstream stretch wrap or straps have to do: a well-locked pattern needs less containment to stay square, while a column stack relies almost entirely on film or bands to hold it.

The same robot and the same cartons can produce a weak or a strong pallet depending on the pattern. A machine that places boxes fast but leaves a column stack on a tall, heavy load will hand a loose, shifting pallet to the wrapper. Conversely, an over-complex interlock on a short, light, fast-moving line can slow the cycle for stability the load does not need. The pattern therefore follows the product, the stack height and the containment that follows, rather than a single most-stable arrangement.

Before comparing patterns, fix the load facts every pattern depends on: carton length, width and height, gross weight per case, how rigid the case and board are, whether the product inside shifts or settles, the pallet footprint and maximum stack height, cases per layer and layers per pallet, the cases-per-minute rate the cell must hold, whether the load will be stretch wrapped, strapped, banded or stretch hooded, and any export, double-stacking or high-bay storage condition. Those facts narrow the pattern the same way case dimensions narrow a sealer choice.

Buyer segments that choose a pattern deliberately

Not every pallet should use the most stable pattern, and not every product flow needs the densest layer. The buyers who come to us for this decision split into four broad segments, and the right pattern and supplier tier follow the segment rather than one universal layout.

High-volume regular-product production lines

These plants run a steady stream of similar cartons through multiple shifts at a predictable cases-per-minute rate. The carton size rarely changes, and the palletizer feeds a controlled flow to wrapping and dispatch. For this segment, a simple, repeatable pattern that the cell cycles fast usually wins, provided the load height and containment can hold the column or block arrangement. Over-engineering the pattern here adds cycle time and program complexity without a stability problem to solve.

Mixed-SKU fulfillment and multi-case pallets

Here one pallet carries several carton sizes, sometimes several products, and the layer has to fit mixed boxes into a square footprint. A mixed layer needs a pattern that offsets and interlocks different dimensions rather than repeating one grid. This segment values a pattern that balances the load, keeps heavy boxes low, and lets the cell program recall recipes per pallet mix, over a single maximum layer speed.

Heavy, unstable or deformable loads

Heavy cases, bulging bags, trays that shift, or products that settle after packing put more demand on layer grip and load square. A pattern that locks layers together and spreads weight evenly matters more than dense packing here, because a shifting case on a tall stack becomes a tipping or damage risk in the trailer and the warehouse.

Export, high-bay and double-stacked storage

Export pallets travel further and meet more handling points; high-bay racks and double-stacked pallets carry load above the bottom layer for long periods. These conditions reward a pattern that keeps the pallet square, distributes weight across the deck and resists creep under storage pressure, rather than one that looks neat only on the floor.

Four layer patterns buyers compare

Most palletizing decisions land on one of four patterns: column, interlock, pinwheel, or brick running bond. Many cells combine patterns across layers, for example a stable interlock on the bottom layers and a denser block on top. The table below compares the four on layer grip, footprint density, cycle and program effort, and the containment they pair with.

Table 1 — Column, interlock, pinwheel and brick patterns compared on layer grip, density, cycle effort and typical containment
Pattern How boxes are arranged Layer grip and stability Footprint density Cycle and program effort Typical containment pair
Column (block) All boxes face the same direction; layers align corner to corner above each other Low inter-layer grip; layers can slide sideways; strong vertical load transfer High; fills the footprint with little gap Fastest and simplest to program; few rotations per layer Needs firm stretch wrap, straps or bands to hold the column together
Interlock (running bond) Boxes offset between layers so each box bridges two below; seams do not line up High grip between layers; resists sideways shift and creep Moderate; slight offset can leave small edge gaps Moderate program; boxes offset or rotated between layers Works with standard stretch wrap; less containment pressure than column
Pinwheel Boxes rotated ninety degrees in alternating groups, locking corners around a perimeter ring High perimeter stability; corners lock; center may stay open Lower; perimeter ring and center gap use more footprint Higher program; rotations and orientation changes per layer Suits tall or perimeter-sensitive loads; wrap holds the ring
Brick (brick running bond) Long and short boxes staggered like brickwork; layers alternate offset across the row Good grip on mixed rectangular boxes; even weight spread Moderate to high; fits mixed dimensions into a square layer Moderate; row-by-row offset programmed per carton mix Standard wrap or banding; good for mixed-SKU pallets

The pattern does not follow preference. It follows the carton shape, the stack height and the containment that follows. A light, short, fast regular carton often belongs in a column or block stack. A tall or heavy load that must resist sideways movement usually needs interlock or pinwheel. Mixed rectangular boxes usually fit a brick bond. Matching the pattern to the wrong product is where leaning pallets, crushed corners and film that cannot hold the load start.

Column (block) stacking: fast and dense, low layer grip

Column stacking places every box in the same orientation and aligns the seams above the boxes below. The layer fills the pallet footprint tightly, the program places boxes in a simple grid, and the cycle per layer stays short. Weight transfers straight down through aligned corners, which suits boxes that carry vertical load well.

The weakness is sideways grip. Because seams line up layer after layer, there is little mechanical lock between layers, and the stack can slide as a unit under vibration or when a corner catches. Column pallets rely on stretch film, straps or bands to hold the layers together, and a tall or heavy column without firm containment can lean. This pattern works best where the load is short, light, regular and well contained downstream.

Interlock (running bond): layers that grip each other

Interlock offsets boxes between layers so each box sits across the seam of two boxes below. The offset breaks the continuous vertical seam and gives the layers a mechanical grip that resists sideways shift and creep. The pallet stays squarer under vibration and storage pressure, which helps tall and heavy loads.

The cost is a slightly more involved program and a small footprint trade-off. Boxes must be offset or rotated between layers, and the layer may leave minor edge gaps that a pure block stack avoids. On very fast lines, the extra placement and orientation can add cycle time per layer, so the buyer should weigh the stability gain against the rate the cell must hold.

Pinwheel: corner-locked perimeter for tall or edge-sensitive loads

Pinwheel rotates boxes ninety degrees in alternating groups so the corners lock around the perimeter of the layer. The perimeter stays square and the edges resist spreading, which suits tall loads, boxes with exposed corners, or pallets where the outside face must stay even. The arrangement often leaves a center gap or an open core, and it uses more footprint than a packed block.

Program effort runs higher because boxes change orientation around the layer, and the pattern fits a limited range of carton dimensions. Pinwheel is a specialized stable perimeter rather than a default for every load; it earns its place on tall or edge-sensitive pallets where an interlock alone will not hold the perimeter.

Brick running bond: mixed rectangular boxes in an even pack

Brick bond staggers long and short boxes row by row, like brickwork, so layers alternate the offset across the row. It handles mixed rectangular dimensions better than a strict grid, spreads weight evenly and keeps the layer square when several carton sizes share a pallet. It is the common pattern for mixed-SKU fulfillment and multi-case shipments.

Like interlock, brick needs a row-by-row offset programmed per carton mix, and the layer count and box orientation matter when the pallet mixes more than two sizes. The pattern works best when the cell can recall a recipe for the common pallet mixes rather than reprogramming each shift.

Configuration matrix: carton, height, containment and mix fit

The table below maps the conditions a site reports to the pattern that usually fits. These are starting points for the specification; the supplier should confirm against a reference load built to your cartons and stack height.

Table 2 — Configuration matrix matching carton shape, load height, containment and product mix to palletizing pattern
Condition reported Column Interlock Pinwheel Brick bond
Uniform square/rectangular cartons, short light stack, high rate Preferred; dense and fast Works, adds cycle the load may not need Over-complex for this flow Unnecessary for single-size layer
Tall or heavy load that must resist sideways shift and creep Not recommended without firm containment Preferred grip option Preferred where perimeter spread is a risk Works for mixed heavy rectangles
One pallet mixes several carton sizes and products Hard to grid mixed sizes cleanly Can interlock two sizes Limited to matched perimeter boxes Preferred for mixed rectangular mix
Perimeter must stay square; exposed corners or tall outer face Perimeter can spread under load Good perimeter grip Preferred perimeter lock Good on rectangular mixed layers
Load will be firmly stretch wrapped, strapped or banded Containment can compensate for low grip Standard containment enough Wrap holds the ring Standard wrap or banding
High-bay racking or double-stacked storage under long pressure Creep risk without firm containment Preferred for long storage stability Preferred perimeter option Good for mixed stored pallets
Very high cases-per-minute, simple repeat grid Preferred speed option Offset adds cycle per layer Rotation adds cycle per layer Row offset adds cycle per layer
Soft, bulging or settling product that shifts after packing Slides easily when product shifts Grip helps hold settled layers Perimeter holds spreading sides Even spread helps mixed soft cases

Two conditions push a buyer away from a column pattern early. The first is a tall, heavy or unstable load where aligned seams can slide or lean. The second is long storage or double-stacking where creep under pressure matters. Two conditions push back from complex patterns: a very fast single-size line where offset and rotation cost cycle time, and a short light load that standard wrap already holds.

How the pattern works with stretch wrap, strapping and banding

The pattern and the containment downstream are one system. A column stack puts most of the holding job on the film or straps; the wrap must pull the layers together against a smooth, aligned side. An interlock or brick stack already locks layers, so the wrap mainly holds the pallet together and guards against dust and moisture rather than compensating for a slipping layer. A pinwheel perimeter reduces side spread but still needs wrap or bands to keep the ring from lifting.

When you plan the cell, decide the pattern and the containment together. A weak pattern cannot be fixed by thicker film alone; extra film on a sliding column adds cost and still lets corners move. Conversely, an over-stable pattern on a light load can waste wrap material and cycle time. The wrapper setting, film gauge and number of wrap layers should be tuned to the actual pattern and load, and the two stations should be commissioned as a pair.

Load squaring before palletizing matters too. Cases that arrive out of square, bulging or misaligned cannot form a clean layer regardless of the pattern. An upstream panel press, side belt or roller squaring station flattens and aligns cases so the palletizer builds a square layer. If pallets lean despite a good pattern, check the case condition and upstream squaring before changing the layer layout.

Supplier tiers: three channels to source palletizing capacity

Integrated end-of-line system suppliers

These suppliers build or assemble palletizing cells alongside conveyors, wrappers, stretch hooders and controls, and can deliver a matched cell with layout, guarding and integration. They bring engineering for payload, reach, footprint and pattern programming, and a reference installation on similar loads. The capital position runs higher, and the quote bundles controls, conveyor, guarding and cell commissioning. This tier suits high-rate lines where the palletizer must match upstream and downstream equipment.

Robot and palletizer specialist brands

Robot makers and dedicated palletizer brands supply conventional layer machines, four-axis, six-axis and cobot arms, grippers and pattern software. They know payload, reach, cycle and layer recipes in depth, and often supply the arm or machine that an integrator mounts into a cell. This tier suits buyers who want a specialist to tune patterns, gripper choice and cycle for their carton range, or who are retrofitting a robot onto an existing conveyor.

Importers, resellers and standard-cell suppliers

Resellers and importers supply standard palletizers and cobot cells at a lower capital position, often with a common design sold under several names. They suit low-volume, regular loads where the buyer can handle basic setup and recipe changes. Confirm local parts availability, gripper spare coverage, software pattern library and service response before purchase, because a cell that waits on a spare controller or gripper part stalls dispatch.

Total cost of ownership: machine, gripper, programing and downtime

Machine purchase sits alongside gripper hardware, pattern programming, consumables and downtime over a five-year run. A conventional layer palletizer, four-axis arm, six-axis arm and cobot cell carry different capital and running cost, and the pattern complexity adds programming and changeover time.

Machine and robot cost: conventional layer machines suit high-volume regular loads at a solid capital position; four-axis arms are the case-handling workhorse; six-axis arms carry a higher price for dexterity on mixed and irregular work; cobot cells offer a low entry point at limited duty and cycle. Gripper hardware, whether vacuum cup, fork or clamp, adds to the cell and must match the case surface and weight.

Programming and changeover: simple column grids are quick to teach. Interlock, pinwheel and brick recipes need layer math, orientation rules and recipe storage per pallet mix. On a mixed-SKU floor, fast recipe recall and easy teaching matter as much as robot speed. Downtime from a pattern that drops cases, a gripper that slips, or a pallet that fails containment lands on shipping, and repeat pattern corrections on the floor add labor the quote rarely counts.

Compare quotes on expected cycles per layer, gripper type and spare, pattern library and recipe support, maintenance intervals, wear parts lead time and local service. A cell with a low purchase price but weak pattern software or slow parts support can cost more over five years than a matched specialist cell that builds stable pallets from day one.

Ten questions to put in the specification

  1. Which carton dimensions, weights and board rigidities will the cell palletize, and what pallet footprint and stack height are planned?
  2. Which pattern or patterns does the cell run for our common loads, and how are recipes stored and recalled for mixed pallets?
  3. What cases-per-minute does the cell hold on average and at peak, and how does pattern complexity change that cycle?
  4. Which gripper fits our case surface and weight, and what is the spare-gripper and cup stock arrangement?
  5. How does the pattern perform under vibration, high-bay storage and double-stacking, and what containment pairs with it?
  6. How are out-of-square or bulging cases handled before they reach the layer?
  7. What guarding, safety interlock and access arrangement applies around the palletizing cell?
  8. Can the cell integrate with our upstream packer/erector and downstream wrapper, conveyor and stretch hooder, and who supplies the interface?
  9. What warranty, spare-parts lead time and local service response are included, and what gripper and controller spares are stocked?
  10. What reference installation handles a similar load, and can the pattern and containment be tested on our real cartons before commissioning?

Five pitfalls we see repeat on stacked loads

Choosing the pattern on appearance alone. A neat-looking column stack can slide once wrapped and shipped. Judge the pattern on layer grip, load height and containment, not on how the first layer sits on the floor.

Over-packing a light fast line with complex patterns. Pinwheel and interlock on a short, light, high-rate carton add cycle and programming for stability the load does not need, cutting throughput without a measured gain.

Separating pattern from wrap specification. The film gauge, wrap layers and tension should be tuned to the pattern and load. Picking wrap after the palletizer can leave a column under-contained or a stable pattern over-wrapped.

Ignoring mixed-SKU recipe recall. A cell that must be re-taught for every new pallet mix stalls a fulfillment floor. Confirm recipe storage, recall time and who updates the patterns between shifts.

Blaming the palletizer for upstream case quality. Bulging, out-of-square or soft cases cannot form a clean layer. Check the packer, erector and any squaring station before concluding the pattern or robot is at fault.

How to test a pattern before locking the recipe

A pattern chosen on paper rarely survives the first real pallet. Before commissioning the cell, build sample loads from actual cartons at the planned layer count and stack height, then run them through the same wrapping and handling the line uses. Check the finished pallet for overhang, uneven corners, gaps that leave product exposed, and any case that rides up or shifts when the pallet is lifted. Repeat the test across the lightest and heaviest carton in the range, because a pattern that holds the heavy box can leave a light box loose in the same layer.

Layer count and case height change how a pattern behaves. A tall stack of many small layers amplifies even a small sideways offset between layers, while a short two- or three-layer pallet tolerates more misalignment. Count the cases per layer and layers per pallet for each product, and make sure the pattern fills the footprint without forcing a case to overhang the deck. Overhang puts load on the pallet edge, damages corners and catches on conveyors and rack entries, and it is often mistaken for a weak wrap when the real cause is a layer that does not fit the deck.

Product behavior after packing matters as much as the empty carton. Bags, pouches, trays and loose contents can settle or bulge after the case closes, so a layer that looked square on the palletizer can spread by the time it reaches the wrapper. If the product settles, allow for that movement in the pattern and the containment rather than sealing the recipe to the fresh-case dimensions. A walk along the finished pallet after a few hours of storage will show whether the load creeps the way the pattern predicted.

Document the tested recipe: carton dimensions, cases per layer, layer count, pattern name, box orientation, gripper setting, wrap gauge and number of film layers. When the line later changes a carton size or board grade, that record shows which assumptions need re-testing instead of guessing from the old recipe. On a mixed-SKU floor, keep one tested recipe per common pallet mix and mark which products pair well in the same layer.

Some loads mix stable and unstable cases on one pallet. The usual approach is to put heavy, rigid cartons on the bottom layers to spread weight and anchor the deck, and lighter or bulging cases above where they do not compromise the base grip. Whether a layer is single-direction or interlocked can vary between the bottom and top of the stack, so the recipe does not have to force one pattern across every layer. Work through each layer from the deck upward rather than treating the whole pallet as one arrangement.

Scenario fit: who should pick which pattern in 2026

High-volume single-size CPG lines with short, light, well-wrapped pallets usually start with a column or block stack for speed and density. Tall, heavy or export loads that must resist creep and vibration usually move to interlock, with pinwheel reserved for perimeter-sensitive tall pallets. Mixed-SKU fulfillment pallets usually run a brick bond, with interlock where two sizes need a firm grip. In every case, tune the pattern and the downstream wrap or bands together, and test the finished pallet to planned weight before locking the recipe. Do not lock a pattern from a single empty layer on the showroom floor; the real pallet decides.

If your flow mixes regular pallets and occasional heavy or mixed loads, ask the supplier for a cell that can hold several recipes and switch by pallet type rather than a single fixed pattern. The right pattern is the one that keeps your actual cartons square through wrapping, transit and storage, and that still meets the cases-per-minute rate the line needs through a full shift.

For the broader machine choice across conventional, four-axis, six-axis and cobot, see the palletizer buying guide. Mixed-SKU robotic layering and pattern programming are covered in the mixed-SKU palletizing guide, cell layout and reach in the palletizer cell layout guide, case squaring upstream in the load squaring guide, and line-rate balance in the line balancing and throughput guide.

References and background sources

The pattern comparison, load stability and containment reasoning in this guide follows standard palletizing practice and our field audits. Market and adoption context draws on public industry sources: the IFR World Robotics report on industrial robot installations, the Statista industrial robots topic on robot and automation adoption, the PMMI market research overview on packaging equipment, and the ISO 13849-1 machinery safety standard on control-system safety performance for guarded palletizing cells. Rate, weight and load figures are planning bands for discussion only; quoted performance follows your cartons, stack height, containment and reference installation.

Frequently asked questions

Kevin Zhou
Kevin Zhou R&D Engineer — Shrink Wrapping & Vacuum Packaging
8+ years in shrink bundling, hood systems and vacuum seal development

Kevin works on machine development for shrink bundling, shrink hoods and vacuum packaging. He tests film shrink ratios, tunnel heat zones, seal bar performance and chamber cycle times, and feeds that back into machine frame and conveyor design. He writes technical articles on shrink film selection, tunnel temperature balancing and vacuum packaging for industrial and food-adjacent secondary packs.

Shrink Wrapping Vacuum Packaging Machine Development