مطبقات روبوتية تعاونية ومفصلية تبني طبليات جاهزة من المنتج المعلب أو المجمّع، بالإضافة إلى مقلبات 90° ومائلات 180° التي تتعامل مع الأحمال الثقيلة وغير المنتظمة حول الخلية.
A palletizer stacks finished cases, bundles or shrink-packs onto a pallet in a stable layer pattern. A conventional palletizer uses fixed pusher and roller mechanisms; a robotic palletizer uses a programmable arm — articulated or collaborative — with a gripper that picks one or more cases and places them according to a layer pattern held in the controller. Changing the product or the pattern is then a software change rather than a mechanical rebuild, which is the central reason robotic palletising has taken over mixed and mid-speed lines.
WP collaborative palletizing robots and the higher-payload robotic palletizing system. The WP-20, WP-40 and WP-50 are collaborative cells that can work beside people without a full safety fence, pick cases from the line and build one or two pallets, and are the natural first step for a line that is still palletising by hand. The full robotic palletizing system is the inline, higher-throughput cell for continuous production, often integrated with a case packer and an inline rotary-arm wrapper.
mechanical and hydraulic 90° upenders and mechanical and enclosed 180° tilters for coils, moulds, drums and large assemblies that a forklift cannot safely reorient. The palletizer and the tilters are sold together when the product has to be turned before or after it is stacked.
| الموديل | التهيئة / التطبيق المعتاد | ||
|---|---|---|---|
![]() |
WP-20 | Collaborative Palletizing Robot | عرض الماكينة → |
![]() |
WP-40 | Collaborative Palletizing Robot | عرض الماكينة → |
![]() |
WP-50 | Collaborative Palletizing Robot 45kg Payload | عرض الماكينة → |
![]() |
Robot Palletizing & Turn-key Lines | Robotic Palletizing System | عرض الماكينة → |
| الموديل | التهيئة / التطبيق المعتاد | ||
|---|---|---|---|
![]() |
Pallet Tilters & Upenders | Mechanical 90-Degree Upender | عرض الماكينة → |
![]() |
Pallet Tilters & Upenders | Hydraulic 90-Degree Upender | عرض الماكينة → |
![]() |
Pallet Tilters & Upenders | Mechanical 180-Degree Tilter | عرض الماكينة → |
![]() |
Pallet Tilters & Upenders | Enclosure 180-Degree Tilter | عرض الماكينة → |
A single collaborative WP cell suits one or two lines at modest rates; a high-speed continuous line needs the full robotic palletizing system or multiple robots, because cycle time is set by the pick-and-place motion and the gripper.
Corrugated cases are gripped with a vacuum or mechanical gripper; bundles and shrink-packs may need a clamp or a layer pick. The gripper is product-specific and is the single most important detail to get right.
Provide the case dimensions and the pallet footprint so the layer pattern is checked for stability and interlock. Mixed or frequently changing SKUs suit robotic palletisers because the pattern is a recipe rather than a fixed guide.
A collaborative WP cell can run beside operators with reduced guarding and a small footprint, which suits existing lines with no space for a safety fence. High-speed cells still use articulated robots inside guarding.
Coils, moulds, drums and large assemblies are reoriented by a 90° upender or a 180° tilter rather than by the robot. If the product must be turned before stacking, the tilter is part of the cell and should be quoted together.
The same WP robots are sold for one line of cases; the difference between cells is the gripper, the throughput and whether a tilter or wrapper is integrated.
نستخدم ملفات تعريف الارتباط لتشغيل الموقع وتحليل حركة الزيارات ودعم استفساراتك. يمكنك قبول جميع ملفات تعريف الارتباط أو إدارة اختياراتك. اطلع على سياسة الخصوصية و سياسة ملفات تعريف الارتباط.