Horizontal and end-load cartoning machines that open a flat carton, insert a product (or flow-wrapped pack), close the tuck-in or glue flaps and deliver a finished retail box — across the ZH-120, ZH-200/250 and ZH-350 series.
A cartoning machine erects a folded paperboard carton, inserts the product — a single item, a flow-wrapped pack, a bottle or a collated bundle — and then closes the carton with either tuck-in flaps or hot-melt glue. On an end-load horizontal cartoner the carton is picked from a magazine, opened onto a chain of flights, the product is pushed in from the end, and the flaps are folded and sealed at the discharge. It is the standard machine for turning a product into a shelf-ready retail box.
The SunAura Packaging Machines ZH series is arranged by carton size and speed. The ZH-120 is the compact horizontal cartoner for small retail boxes and single-serve products; the ZH200 and the full-servo ZH-200/ZH-300 يغطيان النطاق الأوسط المرن بتغيير سريع؛ و ZH-250P هو المعَبئ المؤازر للعمل عالي السرعة المتسق؛ و ZH-350 هو هيكل الصندوق الكبير للكراتين الأكبر والرزم المتعددة. والإغلاق القافز قياسي في بعض الهياكل، والصمغ الساخن في غيرها، لذا فإن طريقة الإغلاق جزء من الاختيار وليست فكرة لاحقة.
A cartoner is almost always fed by something: a flow wrapper, a collator, a denester or a manual in-feed. The economic case for the machine is strongest when the product is already wrapped and a person is currently putting it into boxes by hand — the cartoner both removes that labour and gives a square, repeatable box that an automatic case packer can then handle.
| الموديل | التهيئة / التطبيق المعتاد | ||
|---|---|---|---|
![]() |
ZH200 | Automatic Cartoning Machine | عرض الماكينة → |
![]() |
ZH-200 / ZH-300 | Full-Servo Cartoning Machine | عرض الماكينة → |
![]() |
ZH-120 | Automatic Horizontal Cartoning Machine | عرض الماكينة → |
![]() |
ZH-250P | عرض الماكينة → | |
![]() |
ZH-350 | Automatic Large-Box Cartoning Machine | عرض الماكينة → |
Provide the erected carton length, width and depth and the board grade. Small boxes point to the ZH-120; the largest multi-packs require the ZH-350. The machine and its magazine are sized to the blank, not just the finished box.
Tuck-in flaps are re-openable and need no glue; hot-melt gives a tamper-evident, rigid seal for food and pharma. Specify the closure at build time because the flap-folding and gluing stations differ.
A cartoner only runs as fast as it is fed. A flow-wrapped product is delivered by a lug conveyor, bottles by a starwheel, loose items by a collator — the in-feed is chosen with the product, and the WX160 aligner or manual in-feed are used for lower automation.
The ZH-120 suits moderate speeds, the ZH-250P and the full-servo ZH-200/300 run continuously and change size from the HMI, which matters when a line runs many SKUs and short batches.
All machines here are horizontal end-load cartoners for products pushed into the end of the box. If the product is dropped from above — bottles or bags into an open tray — a top-load or vertical cartoner is the correct, different machine.
Cartoners commonly sit between a flow wrapper and a case packer. Check the discharge height and the way the closed carton is collated, especially if a robot will pick it downstream; the carton orientation must be consistent.
The ZH range is sold wherever a product is converted to a retail paperboard box; the machine size changes with the carton, not the industry.
نستخدم ملفات تعريف الارتباط لتشغيل الموقع وتحليل حركة الزيارات ودعم استفساراتك. يمكنك قبول جميع ملفات تعريف الارتباط أو إدارة اختياراتك. اطلع على سياسة الخصوصية و سياسة ملفات تعريف الارتباط.