Sales: [email protected] · WhatsApp +86 136 4542 9121 — CE-certified packaging machinery since 2008
Insights

Vacuum chamber machine buying guide 2026: single-chamber vs double-chamber vs rotary

Technical Knowledge

Nov 16, 2026 SunAura Engineering Team

TL;DR. A chamber vacuum machine seals products by placing the whole filled bag inside a chamber, pulling the air out, applying an optional gas flush, and heat-sealing the bag mouth before the chamber vents and opens. The chamber family splits into single-chamber, double-chamber and rotary-chamber machines. This guide compares those three formats for 2026 buyers. It covers how each chamber cycle works, the pump, seal and gas-flush specs that drive package quality, typical output bands, bag and product fit, consumable and wear-part costs, and the questions to put to suppliers before an RFP closes. Chamber machines sit alongside external-nozzle and vacuum skin packaging; those formats are referenced only where the choice matters. Price bands below are typical ex-works planning ranges before installation, guards, freight and tooling. Cycle figures are planning estimates on regular pillow bags; treat them as bands, not guaranteed cycle times.

By Emily Chen, Applications Engineer — Vacuum & Sealing. Emily has commissioned chamber vacuum and external-nozzle packers across food processing and wholesale packing, and audits seal quality, vacuum level and shelf-life performance on chamber-line acceptance trials.

How a chamber vacuum cycle works

Follow one bag through the machine before comparing formats. The operator loads a product into a bag and lays the bag mouth across the seal bar inside the chamber. The lid closes and the machine pulls a vacuum through a chamber vacuum pump, removing air from the bag and the chamber together. Once the target vacuum level is reached, the seal bar heats and seals the bag mouth; on machines fitted for modified atmosphere, a gas flush replaces some of the removed air with a controlled gas mix before sealing. The chamber vents back to atmospheric pressure, the lid opens, and the sealed bag comes out with the product held under the final package atmosphere.

Because the whole bag sits inside the chamber, the machine pulls vacuum around and through the bag rather than sucking air through a nozzle at the bag mouth. The bag collapses onto the product after the air is removed, which is why chamber packing handles pouches with loose product, powders that shift, and products where the package must draw tight around the contents. External-nozzle machines pull air through a nozzle placed at the bag opening and seal outside a chamber; that format suits large or odd-shaped packages that will not fit inside a chamber. The chamber-versus-nozzle-versus-VSP choice is covered in our vacuum packaging machine buying guide.

Three specs decide package quality on a chamber machine: the pump and how fast the chamber reaches target vacuum, the seal bar and how cleanly it bonds the bag mouth, and whether the machine offers a gas flush for modified atmosphere. Chamber size sets the bag and product size that fit; cycle time sets output; lid sealing and interlock set safe operation. The three formats below trade these specs in different ways.

Single-chamber machines

Cycle and layout

A single-chamber machine has one chamber and one lid. The operator places loaded bags on the seal bar, closes the lid, and the machine runs one full vacuum, seal and vent cycle. The lid opens, the operator removes the sealed bags, reloads the chamber, and the next cycle starts. Everything waits on one chamber: vacuum, seal, vent and loading alternate in sequence on the same station.

Single-chamber units are the entry point for chamber vacuum packing. They sit on a bench or stand, connect to a vacuum pump sized to the chamber, and run batches in a manual loading rhythm. They appear in butcher shops, delis, small food processors, wholesale packing rooms and laboratories where volumes are moderate and the product range changes.

Strengths

A single-chamber machine buys the lowest entry price and the smallest footprint in the chamber family. Setup is simple: place the bag, close the lid, start the cycle. The machine holds one chamber and one seal bar, so maintenance and wear-part lists stay short. Changeover between bag sizes and products is fast because the operator adapts bag placement and seal time by hand. The format also tolerates a wider mix of bag shapes within the chamber size, since each cycle is loaded by hand.

The single chamber is forgiving on a first vacuum line. A plant that is still learning vacuum level, bag choice and seal timing can run trials on one unit without committing to a high-volume cell. Service access to the pump, seal bar and lid seal stays straightforward on a bench-top or floor-standing frame.

Limits and trade-offs

Output is capped because loading and unloading share the same chamber as the vacuum cycle. The machine cannot load the next batch while the current batch is under vacuum, so effective bags per hour track the operator’s loading speed plus the vacuum-seal-vent cycle. On high-volume lines, the idle chamber between cycles becomes the bottleneck. Chamber size also limits bag and product dimensions; oversized or tall products will not fit the cavity.

Single-chamber units depend on an operator at the station for every load. Labor follows the cycle, and repeated lid lifting and bag handling can be fatiguing over a shift. Gas flush and dual-seal options add capability but also cycle time and cost, and a bench unit’s pump capacity is sized to the smaller chamber rather than high throughput.

Double-chamber machines

Cycle and layout

A double-chamber machine has two chambers that alternate around a shared lid assembly, often a lid that swings or slides between the two. While one chamber runs its vacuum and seal cycle, the operator loads or unloads bags in the other chamber. When the first cycle finishes, the lid moves over the loaded second chamber, the loaded batch runs, and the finished first chamber is unloaded and reloaded. The two stations overlap manual work with machine time, which keeps the machine working while the operator handles bags.

This overlap is the main reason double chambers replace single chambers at mid volume. The machine is still a batch chamber format, but the operator’s loading and unloading no longer stall the vacuum cycle on the same station. Double chambers appear in medium-volume food processors, wholesale packers and production rooms that need more bags per hour than a single chamber can deliver without adding a second operator.

Strengths

The dual-station layout raises effective output over a single chamber at moderate up-front cost, because one machine spreads manual handling across two chambers. The operator stays in a steady load-unload rhythm, and the shared lid or seal assembly keeps equipment count lower than running two separate single chambers. Double chambers accept the same range of bag and product sizes that fit each cavity, and they commonly offer wider seal bars, stronger pumps and gas flush than entry bench units.

Changeover between products still happens by loading bags by hand, so a double chamber keeps the flexibility of manual batch packing while improving bags per hour. The format suits lines where volume has outgrown a single bench unit but does not yet justify a fully automated rotary or inline solution.

Limits and trade-offs

Double chambers still run in batches, not a continuous flow. Each chamber loads and seals a set of bags per cycle, and output still steps with cycle time and the operator’s loading pace. The swinging or sliding lid adds a mechanism to maintain, and the two chambers need even seal pressure and vacuum performance to stay consistent. Footprint is larger than a single chamber, and the swing path or slide area needs clear access around the machine.

Very high volume, continuous infeed or products that must be packed with minimal manual handling still point away from a double chamber. Bag size is limited to the cavity, and products that require automated feeding or alignment fit poorly into a manually loaded chamber. The shared lid also means a seal or lid-seal fault on one side affects both stations until serviced.

Rotary-chamber machines

Cycle and layout

A rotary-chamber machine uses a rotating table or turret that carries several chambers or chamber positions around the cycle. Bags are loaded at one station, the chamber travels through vacuum, seal and vent positions as the turret indexes, and sealed bags discharge at another station. Loading and processing run on separate positions around the rotation, which lets the machine keep a near-continuous flow rather than alternating two fixed chambers.

Rotary chambers are the high-output end of the chamber family. They appear in higher-volume food processing, wholesale and co-packing where bag count per hour justifies the larger machine, the turret mechanism and the higher capital cost. Some rotary designs pair the chamber turret with feeding or alignment aids so bags are positioned consistently at the load station.

Strengths

The turret spreads the cycle across multiple positions, so the machine keeps processing chambers while bags are loaded and unloaded at separate stations. Output per hour runs well above a double chamber on matching bags, and the fixed rotation repeats the same vacuum, seal and vent sequence for each cavity. Rotary units commonly carry larger pumps, wider or double seal bars, gas flush and cycle-data controls suited to steady production. The format holds consistent packages across a long run, which matters when product shelf life and seal appearance are inspected at the customer.

Limits and trade-offs

A rotary chamber sits at a higher price band and takes more floor space than a single or double chamber. The turret, indexing drive and multiple lids or seals add mechanical complexity and a longer parts list. Changeover between very different bag sizes can mean adjusting stations, seal bars and turret settings, and the machine pays back on steady volume rather than occasional small batches. Bag size still follows the chamber cavity; products that do not fit a bag-and-cavity format need a different machine.

Rotary chambers also need a maintenance team comfortable with the indexing mechanism, lid seals and multiple seal bars. Spare-parts reach and service response matter more at this duty level, because a stopped turret holds back a higher output line than a stopped bench unit.

Single, double and rotary chamber compared

The table below summarizes the three formats on typical output, labor, chamber capacity, footprint, price position and best fit. Bands are 2026 planning ranges; final selection depends on bag size, product, required vacuum level, gas flush and line layout. Chamber, external-nozzle and skin-pack comparison is detailed in our vacuum machine format guide.

Table 1 — Chamber vacuum machine formats compared on output, labor and fit
Format Typical output band Labor and loading Chamber / bag fit Footprint and price Best fit
Single-chamber Low to mid; batch cycles, one station One operator loads, unloads and starts each cycle One cavity; bag and product limited to chamber size Small footprint; lowest price in chamber family Small processors, delis, labs, low-volume trial lines
Double-chamber Mid; two stations alternate around shared lid One operator works the idle chamber while the other cycles Two matching cavities; medium bag sizes Moderate footprint; mid-band price Medium-volume processing and wholesale packing
Rotary-chamber High; turret indexes multiple chambers around the cycle Loading and discharge at separate stations; reduced idle time Multiple cavities; consistent bags per station Larger footprint; high-band price and maintenance level High-volume food processing, co-packing, steady runs

Matching the chamber to bag style, product and packaging goal

The chamber format follows the package as much as it follows the machine. Before comparing units, settle what goes inside the bag, which bag film you run, and whether the goal is plain vacuum, a tight shrink-style pack or a modified-atmosphere package.

Plain vacuum bags and pouches. Standard vacuum pouches collapse onto the product after air removal and seal across the bag mouth. Chamber machines handle these well across single, double and rotary formats. Bag film barrier, sealability and slip resistance follow the product and shelf-life target; a poor film choice shows up as seal channels, wrinkled seals or later leakage. Seal quality checks across chamber, nozzle and VSP lines are detailed in the vacuum seal quality and shelf-life guide.

Liquid, moist or loose products. Liquids and moist contents can sit in the bag mouth area and prevent a clean seal, or shift when the chamber pulls vacuum. Bags sized with extra headroom, seal bar placement that keeps liquid away from the seal line, and a vacuum profile that controls how fast air leaves all matter here. Products with loose pieces that shift inside the pouch benefit from a chamber that lets the bag draw evenly around the contents. Check that the seal bar and bag support handle your product without liquid washback onto the seal.

Modified atmosphere (gas flush). Where the package needs a protective gas mix after air removal, the machine needs a gas flush and usually a gas supply and control. Gas flush replaces part of the vacuumed air with a set blend, seals the bag under that atmosphere, and is selected against the product’s shelf-life and oxidation goals. Not every chamber base model carries gas flush; confirm the option and the gas control when MAP is part of the spec.

Large or odd-shaped packages. Anything too big for the cavity — large bags, bulk packs, trays that will not drop inside a chamber — does not suit a chamber machine at all. Those cases point to an external-nozzle or another format rather than a bigger chamber. Measure the longest bag dimension and the product height against chamber clearance before shortlisting a format.

Buyer segmentation: who each chamber format fits

Chamber selection shifts with hourly bag count, product range, required atmosphere, labor capacity and budget. The four profiles below cover the buyers we see most often on 2025–2026 vacuum-packing projects.

Profile A: high-volume steady production, multi-shift

This buyer runs a narrow product and bag range at steady high output across two or three shifts. Priorities are consistent seal quality, repeatable vacuum level and low per-bag labor. Changeover is rare, so recipe recall matters less than mean time between faults and pump and seal-bar life. A rotary chamber with a pump sized to the cavities and stocked wear parts fits this profile. The line should plan feeding, bag loading and discharge around the turret rhythm, and seal and lid parts should be serviceable without a factory visit for routine changes.

Profile B: medium-volume mixed product line

This buyer runs several products and bag sizes on one station, with vacuum level or gas mix changing between SKUs. Output sits in a mid-volume range, and effective bags per hour are shaped by changeover and seal consistency across specs. Priorities are quick bag changes, reliable seal timing per recipe, and a chamber that holds the full bag range. A double chamber often fits this profile better than a rotary, because manual flexibility and moderate volume match. A supplier’s mixed-product references matter more than a single peak cycle number.

Profile C: small processor, butcher shop or lab, low volume

This buyer starts at a low bag rate with a tight capital budget and limited maintenance staff. A single-chamber bench or floor unit handles standard pouches at this stage. Priorities are low entry price, small footprint, straightforward service and a clear upgrade path. Keep bag range and pump capacity compatible with a later double chamber, without buying high-rate capacity the operation has not secured.

Profile D: MAP, shelf-life or regulated market

This buyer packs products where shelf life, package atmosphere or market documentation is the deciding factor. Volume may fall in any profile, but the gas flush, seal control and machine must meet the destination market’s safety and hygiene baseline. Risk assessment and guarding design follow standards such as ISO 12100, and safety-related control circuits follow ISO 13849-1 where applicable. Stainless construction, washdown suitability and documentation should be part of the supplier shortlist from the first RFP.

Configuration matrix: options, necessity and price effect

Beyond the base chamber format, options change package quality, changeover and running cost. The matrix lists common options, how necessary they are for a typical line, and the typical way they move price. Markup is relative to the base machine; exact percentages depend on supplier, region and configuration.

Table 2 — Chamber vacuum machine configuration matrix
Option Typical necessity Typical price effect What it changes on the floor
Gas flush / modified atmosphere module Required where protective atmosphere is specified; optional plain vacuum Substantial uplift with gas control and supply connection Replaces removed air with controlled blend; supports shelf-life targets
Larger pump or higher pump displacement High on larger chambers or short cycle targets; matched to cavity volume Moderate to substantial uplift Reaches target vacuum faster; shortens cycle and stabilizes level
Double or dual seal bar / wider seal Recommended where seal strength or wide bags matter Moderate uplift with second bar and control Strengthens the seal line; covers wider bag mouths
Programmable vacuum, seal time and temperature recipes High on mixed SKU lines; optional single product Moderate uplift with HMI and recipe memory Recalls settings per bag or product; cuts changeover and seal variation
Stainless frame and washdown-grade construction Required for wet, food-contact or washdown zones; optional dry packing Substantial uplift over painted steel Corrosion and cleaning-cycle compliance; no direct speed effect
Seal or package presence check and alarm Recommended where unsealed or weak bags are costly Moderate uplift with sensors and alarm logic Flags unsealed or off-spec bags before dispatch; feeds quality data
Automatic bag support, positioning or load aid Recommended on rotary or high-rate stations; optional manual batches Moderate uplift with positioning guides or feed aid Holds bag mouth on the seal bar consistently; reduces seal-off misloads
Remote diagnostics and cycle data logging Recommended for multi-shift or distant plants Moderate uplift; possible recurring service fee Shortens fault recovery; supplies vacuum, seal and wear history
Spare seal bars, lid seal and filter kit at order stage Recommended for long-lead or proprietary parts Low to moderate one-time cost Keeps availability high through the first service cycle

Do not stack every option onto every machine. A plain-vacuum small processor gains little from MAP gas control, dual seals or washdown steel. A shelf-life-critical MAP line skipping gas control or seal monitoring usually pays more in rejected packages and short shelf life than the option price.

Supplier tiers: global OEM, regional specialist, local or refurbished

Chamber vacuum suppliers fall into three broad tiers, and the right tier depends on bag volume, product requirements, service expectations and budget. Build quality and parts availability differ between them.

Tier 1: global packaging machinery OEMs. These brands sell complete chamber, nozzle and skin-pack machines with engineering responsibility for vacuum performance, seal quality and line integration. Lead times are typically longer and prices sit in the upper band, with support networks reaching most major markets. They suit Profile A high-volume lines and Profile D MAP or regulated projects where documentation, spare-parts reach and long-term service matter. Proposals should include vacuum level and seal tests on your product and bag, not only brochure cycle time.

Tier 2: regional specialists in vacuum and sealing equipment. These manufacturers build solid chamber machines in a specific duty range, paired with local supply and integration partners. Prices sit in the middle band, lead times are usually shorter than Tier 1, and service engineers are reachable regionally. This tier suits Profile B mixed-product lines and most mid-volume projects. When the chamber shares a line with other specialist machines, clarify in writing who owns the interface, signals and the line-level output guarantee.

Tier 3: local suppliers, bench units and refurbished machines. This tier offers the lowest entry price and short lead times, often with manually loaded single chambers or reconditioned units. It suits Profile C small processors and auxiliary low-volume stations, provided residual pump condition, seal-bar wear, remaining warranty and support terms are checked in writing. A refurbished chamber can be a reasonable first step, but run it under your bags and product before acceptance; a weak pump or uneven seal bar can leak packages over time and cost more than the saved purchase price.

Across all tiers, ask for references on lines running your bag film, product and atmosphere, and inspect a comparable installation if you can. Chamber quality is easiest to judge on a running machine: watch vacuum pull-down time, seal appearance, how evenly bags seal, how often a cycle aborts, and how fast an operator changes a seal bar or lid gasket.

The five-year cost of a chamber vacuum station

The purchase price is the visible part of the decision; the five-year cost lives in consumables, labor, maintenance and the lost product from leaking or rejected packages. The table outlines the TCO categories. Figures are planning categories; build your own numbers from measured bag counts, labor rates and downtime history.

Table 3 — Five-year TCO categories for a chamber vacuum machine
Cost category What it includes How a weak machine drives it up
Purchase and machine hardware Chamber frame, lid, seal bars, pump, controls, guards, gas module Oversizing the duty class raises up-front spend; under-sizing forces a later replacement
Installation and commissioning Placement, power and compressed air, gas supply, vacuum setup, operator training Mismatched chamber size, power or venting adds re-commissioning time
Consumables and wear parts Seal bars, lid gaskets, filters, pump oil or service, heating elements, spare parts Abrasive products and poor seal design shorten part life; proprietary parts raise cost
Direct labor Operators, bag loaders, changeover and cleaning crew Unreliable stations need hands-on watch and resealing that a dependable machine absorbs
Downtime and rejected packages Pump faults, seal failures, leaking bags, held shipments Chronic seal or vacuum failures pull bags off the line for rework; leaking packs reaching customers trigger complaints and returns
Overtime and missed orders Extra hours to recover target output; late or split shipments A station that cannot hold the line pace pushes production into overtime or missed delivery windows
Earlier retrofit or replacement Chamber upgrade, second machine within the asset life Fixes deferred past commissioning usually cost more than specifying the duty class correctly at the start

A practical way to frame the hidden cost: each bag that leaves the station with a weak seal or insufficient vacuum has to be caught, resealed or, worse, rejected after storage. On a mid-volume line, even a small reject rate adds up to hundreds of touched bags per month, plus the product lost inside a leaking package. Multiply per-bag rework time by labor rate and the product loss by unit value, and that figure is what a better chamber pays back. Pump and seal-bar maintenance also count: compare pump service intervals and seal-bar life across formats before deciding on purchase price alone.

Ten questions to ask your supplier before the RFP closes

  1. Which chamber format do you supply — single, double or rotary — and what bag size, product weight and chamber cavity is the machine rated for?
  2. What bags per hour can the machine deliver under our product, film and bag size, rather than the brochure cycle on empty pouches?
  3. What pump displacement and target vacuum level does the machine reach, and what is the pull-down time for our chamber volume?
  4. Does the machine offer gas flush, and what gas mix, control and supply connection are required for our modified-atmosphere package?
  5. What seal bar width, seal time and temperature range are specified, and is a double seal bar available for our bags?
  6. Which wear parts are replaceable in the field, what are expected replacement intervals at our bag count, and what are part numbers and lead times?
  7. How are seal settings and vacuum levels changed between products: manual adjustment, recipe recall or both?
  8. How are lid jams and aborted cycles cleared, what guarding and interlock applies during access, and does the reset sequence protect the operator?
  9. Does the station include seal or package presence detection, and what alarms or signals does it pass to the line control?
  10. What does the quote include: installation, commissioning, training, warranty length, spare-parts stocking, service response time and remote support, and what is excluded?

Five common pitfalls buyers hit

  • Choosing the format by price per bag without checking cycle overlap. A single chamber looks cheap per unit but loses output to idle loading time. Compare bags per hour and labor per bag across formats, not only purchase price.
  • Under-sizing the pump for the chamber and cycle target. A pump that cannot pull target vacuum in time stretches every cycle and weakens the package. Match pump displacement to chamber volume and your required pull-down time.
  • Ignoring bag film and seal compatibility. A good machine on the wrong film still channels or wrinkled seals. Test your actual bag stock on the machine, including any metallized or co-extruded film you plan to run.
  • Assuming plain vacuum handles every product. Moisture, liquid washback or a shelf-life goal that needs a gas mix changes the spec. Confirm whether the package is plain vacuum or MAP before selecting the base model.
  • Testing on clean dry demo bags, not your production product. Product weight, moisture and bag headroom vary between samples. Run your own filled bags through the cycle, inspect the seal and check package consistency before acceptance.

Recommendations by scenario

High-volume steady production. Specify a rotary chamber with a pump sized to the cavities, stocked seal and lid parts, and package presence monitoring. Weight mean time between faults, recovery time and seal consistency above peak brochure cycle time. Plan bag feeding and discharge around the turret rhythm from the first layout review.

Medium-volume mixed product line. Lean toward a double chamber with accessible seal bars and recipe recall where justified, and a station that handles every bag size in your range. Compare proposals on changeover minutes per SKU as well as steady bags per hour, and pick a supplier with comparable mixed-product references.

Small processor or startup. Start with a single-chamber bench or floor unit matched to current low volume and standard pouches. Keep bag range and pump capacity compatible with a later double chamber, and avoid buying high-rate capacity the operation has not secured. A local or refurbished entry can work if pump condition, seal-bar wear and support terms are verified in writing.

MAP or shelf-life-critical line. Specify gas flush control, seal monitoring and construction to the destination market’s hygiene and safety standards, and confirm service and spare-parts reach in the shipping region. Run the same vacuum-level and seal tests as any other line, but build documentation and remote support into the shortlist from the first RFP.

Browse the full machine range on our vacuum packaging machines overview page, and compare chamber, external-nozzle and skin-pack options in our vacuum format buying guide.

Frequently asked questions

What is the difference between single, double and rotary chamber vacuum machines?

A single chamber runs one vacuum, seal and vent cycle per station, with the operator loading and unloading the same chamber between cycles. A double chamber alternates two cavities around a shared lid, so manual loading overlaps the other chamber’s cycle and output rises. A rotary chamber indexes several cavities around a turret, with loading and discharge at separate stations for near-continuous high-volume output.

How do I choose between a chamber and an external-nozzle vacuum machine?

A chamber pulls vacuum around the bag inside a sealed cavity and suits pouches, loose product and tight vacuum packs. An external nozzle sucks air through the bag opening and seals outside a chamber, suiting large, rigid or odd-shaped packages that will not fit a cavity. Measure bag dimensions, product shape and whether the package must draw tight around the contents before choosing.

How many bags per hour can a chamber vacuum machine handle?

Output tracks the format and cycle time. Single chambers run low to mid batch volumes, double chambers lift output by alternating two stations, and rotary chambers reach the highest bags per hour on steady runs. These are planning bands; ask the supplier for an effective rate under your actual product, film, bag size and required vacuum level, because brochure cycles on empty pouches overstate real output.

Does a chamber vacuum machine do modified atmosphere packing?

Only when fitted with a gas flush module. Plain vacuum machines remove air and seal without replacing it. MAP models introduce a controlled gas mix after vacuum pull-down and before sealing, using a gas supply and control matched to the product and shelf-life target. Confirm gas flush, gas control and your required mix are part of the spec before shortlisting.

Which wear parts on a chamber vacuum machine need regular replacement?

Main consumables are seal bars and heating elements, lid gaskets, filters and pump service parts. Pump oil or service intervals follow the pump type and cycle count; lid gaskets and seal bars wear with cycles and bag handling. Keep a spare seal-bar and gasket set on high-cycle lines, and ask suppliers for replacement intervals at your bag count, part numbers and lead times.

References: PMMI market research on packaging machinery and end-use markets, ISO 12100 machinery safety: general principles for design and risk assessment, ISO 13849-1 safety-related parts of control systems, OSHA workplace safety and machinery guarding guidance, EU food contact materials regulation 2023/1230.

Emily Chen
Emily Chen Senior Mechanical Engineer — Case Erectors & Packers
10+ years in carton erection and case packing mechanism design

Emily designs the mechanical systems inside case erecting and case packing machines: blank feeds, magazine capacity, suction and flap-forming stations, product pickup and placement mechanics, and case discharge conveyors. She writes about erector and packer mechanisms, changeover times, dimensional limits and what a mechanical spec sheet should list.

Case Erectors Case Packers Mechanical Design