Sales: [email protected] · WhatsApp +86 136 4542 9121 — CE-certified packaging machinery since 2008
Insights

Stretch Wrapper Turntable vs Rotary Arm: Buyer Guide 2026

Technical Knowledge

Nov 6, 2026 SunAura Engineering Team

TL;DR. Choosing between a turntable and a rotary arm stretch wrapper is the single most consequential decision in pallet wrapping. Turntables cost $3,000–$25,000 and handle most loads; rotary arms cost $25,000–$80,000 and are for unstable, tall or light loads that cannot rotate. This guide compares both, plus orbital and horizontal wrappers, and the 5 questions that decide which you actually need.

By Sarah Liu, Materials Engineer. Sarah has specified stretch wrappers for 9 years and has tested film containment on turntable vs rotary arm cells side by side.

1. The four wrapper families

Smithers’ 2025 stretch wrap report groups stretch wrappers into four families: turntable, rotary arm, orbital and horizontal. Turntables still hold ~70% of the market on stable pallet loads; rotary arms grow fastest on light or tall loads where rotation would tip the pallet.

PMMI’s secondary packaging survey notes that turntable wrappers remain the default first automation for small plants, because they are cheap, simple, and need only one operator to load the pallet.

2. Turntable vs rotary arm

Table 1 — Turntable vs rotary arm
Dimension Turntable Rotary arm
Price $3,000–$25,000 $25,000–$80,000
Speed 20–40 pallets/hour 30–60 pallets/hour
Max load weight 2,000 kg 2,000 kg
Unstable loads No — they tip Yes — pallet stays still
Tall loads (>1.8 m) Marginal Yes
Light loads (<200 kg) Spin out Yes
Floor space Small (3×3 m) Larger (5×5 m)

3. When to choose which

Table 2 — Decision matrix
Your load Recommended
Stable boxes, 500–1,500 kg, 1.2–1.8 m tall Turntable
Light, tall, or unstable (bags, loose bundles) Rotary arm
Long loads (lumber, tubing) Orizontal / horizontal
Odd-shaped or very tall (>2.5 m) Rotary arm
Under 20 pallets/hour, small budget Semi-automatic turntable

4. Supplier tiers

Table 3 — Wrapper supplier tiers
Tier Examples Price
Global OEM Lantech, Wulftec, Mosca, Tab, Atlanta 2–3×
Regional builder Domestic wrapper manufacturers 1.2–1.6×
Direct-from-Asia Chinese wrapper exporters 0.4–0.7×

5. Common pitfalls

  1. Buying a turntable for unstable loads — they tip in the first week.
  2. Under-specifying the carriage — 100% pre-stretch wastes film; buy adjustable 100–300%.
  3. Ignoring load height — a 2 m load needs a tall mast, not a standard one.
  4. No scale built in — you add a separate $3,000 scale later.
  5. Forgetting corner boards — film alone does not protect bagged loads.

6. Frequently asked questions

Sarah Liu
Sarah Liu Materials Engineer — Film & Strapping Technology
9+ years in stretch film, strapping band and consumable selection

Sarah evaluates packaging consumables against machine capability: film gauge and prestretch, PP versus PET and steel strapping, core width, tension settings and corner board use. Her articles connect film and band choice to machine settings, freight damage rates and total cost per pallet, rather than recommending the cheapest consumable on paper.

Stretch Film Strapping Packaging Materials