TL;DR. A shrink wrapping line in 2026 costs $15,000 (manual L-bar sealer + tunnel) to $150,000+ (automatic side-sealer with heat tunnel). The choice between L-bar, side-sealer and sleeve wrappers depends on product size, speed and whether you need perforated film. This guide compares the three, the three tunnel types, and the 5 mistakes that cause film burn or weak seals.
By Kevin Zhou, R&D Engineer. Kevin has designed shrink wrapping lines for 8 years and has tested PE, PVC and POF film on tunnels across 150°C–220°C.
1. The shrink wrapping market
Smithers’ 2025 shrink film report notes that POF (polyolefin) film continues to replace PVC on food and consumer goods, driven by food-contact compliance and clearer optics. PE film remains default for multi-bottle and multi-case bundles.
PMMI’s secondary packaging survey shows shrink wrapping as the third-largest secondary packaging investment in CPG, after case packing and palletizing. Growth is steady (~5%/year) as plants replace manual bagging with automated shrink.
2. Three sealer types
| Type | Speed | Price | Best for |
|---|---|---|---|
| L-bar sealer (manual/semi) | 5–15 packs/min | $3,000–$15,000 | Small batches, mixed sizes |
| Automatic side-sealer | 15–40 packs/min | $20,000–$60,000 | Mid-volume, consistent sizes |
| Continuous sleeve wrapper | 40–100 packs/min | $60,000–$150,000 | High-volume, bottles/cans |
3. Tunnel types
| Type | Temp range | Best for |
|---|---|---|
| Ambient convection | 120–160°C | POF, thin film |
| Hot air circulation | 160–200°C | PE, thick film |
| Infrared (IR) | 180–220°C | High-speed, uniform shrink |
4. Configuration checklist
- Film material: POF for food/retail; PE for multi-packs; PVC is fading.
- Film gauge: POF 15–30 μm; PE 50–100 μm.
- Tunnel temp: POF 140–160°C; PE 180–200°C.
- Conveyor speed: 5–15 m/min; adjustable per film.
- Seal bar: constant heat vs impulse; impulse for thin POF.
- Vent holes: required to prevent ballooning on sealed packs.
5. TCO over 5 years
| Cost | L-bar + tunnel ($10k) | Auto side-sealer ($40k) |
|---|---|---|
| Purchase | $10,000 | $40,000 |
| Film (5 years) | $15,000 | $15,000 |
| Labour (1.0 vs 0.2 operator) | $120,000 | $24,000 |
| Maintenance & energy | $3,000 | $8,000 |
| 5-year TCO | $148,000 | $87,000 |
6. Common pitfalls
- Wrong tunnel temp for the film — POF burns at 200°C.
- No vent holes — packs balloon and burst.
- Impulse sealer on thick PE — it does not seal cleanly.
- Under-sizing the tunnel — long products stick out and burn.
- Ignoring energy cost — a 200°C tunnel draws 15–30 kW.
