パレット荷をフィルムで固定するターンテーブル式・インラインロータリアーム式・水平オービタル式ストレッチ包装機。コンパクト入門機から連続無人出荷向け高速ロータリーラインまで。
パレット包装機(ストレッチ包装機)は、仕上がった荷をストレッチフィルムでパレットに結束します。 A powered pre-stretch head pulls the film beyond its resting length before laying it on the load; the elastic memory of the film pulls the load inward and together. The machine is usually the last automatic process before the forklift leaves the line, and it is what stops a pallet from leaning, shedding or opening in a container.
SunAura Packaging Machines の製品群 is split by how the load moves. Turntable wrappers rotate the pallet on a platform while the film head rises and falls — the standard, lowest-cost and most common machine, with a top-platen variant for light or unstable loads and a heavy roller-table frame for heavy pallets. Inline rotary-arm wrappers keep the load stationary and rotate an arm around it, which suits very light, tall or unstable loads and very high throughput; the load can be conveyed without stopping. Horizontal orbital wrappers rotate film around the long axis of long products — timber, doors, profiles, bundles. Radial and gantry roll wrappers wrap cylindrical rolls such as paper, fabric and nonwoven.
The decision almost always begins with the load: a stable, cuboid pallet at moderate rate is a turntable job; a light, tall or non-stop high-speed load is a rotary-arm job; a long product that cannot sit on a square pallet is an orbital job. Get that first decision right and the pre-stretch ratio, top-sheet and roping options are refinements on top.
10 machines — four turntable, two inline rotary-arm, two 水平オービタル and two ラジアルロール包装機 — for square pallets, 長尺荷 and cylindrical rolls.
| モデル | 構成 / 代表的な用途 | ||
|---|---|---|---|
![]() | ターンテーブルパレット包装機 | 標準ターンテーブルパレット包装機 | 装置を見る → |
![]() | ターンテーブルパレット包装機 | 大型ターンテーブルパレット包装機 | 装置を見る → |
![]() | ターンテーブルパレット包装機 | トッププラテン付きターンテーブルパレット包装機 | 装置を見る → |
![]() | ターンテーブルパレット包装機 | ローラーテーブル付き重量級ターンテーブル包装機 | 装置を見る → |
| モデル | 構成 / 代表的な用途 | ||
|---|---|---|---|
![]() | インラインロータリーアーム包装機 | インラインロータリーアーム包装機 | 装置を見る → |
![]() | インラインロータリーアーム包装機 | 高速インラインロータリーアーム包装機 | 装置を見る → |
荷物の形状と安定性から始め、次に処理能力と作業者の有無を決めます。
A stable, square, weighted pallet suits a turntable. A light, tall, narrow or easily-tipped load is better on a rotary-arm wrapper where the load does not spin, or on a turntable with a top platen that holds the stack down during wrapping.
Turntables are the economical choice for batch and moderate rates. Rotary-arm wrappers carry the load straight through on a conveyor and wrap without stopping, which is the inline, high-throughput and unmanned answer.
Confirm the maximum load and the pallet footprint. Heavy pallets may require the heavy turntable frame with a roller table or an automatic ramp; very light loads need less torque and a top-sheet rather than a clamp.
Timber, profiles, doors and bundles are wrapped end-to-end on a 水平オービタル wrapper; cylindrical paper, fabric and nonwoven rolls are handled by the radial and gantry roll wrappers. These are purpose-built, not adapted turntables.
A powered pre-stretch head stretches the film to a fixed percentage before applying it; the higher the pre-stretch, the less film is used per pallet and the tighter the load. Compare film cost per wrap, not just the machine price.
Outdoor or container export loads often need a top sheet laid over the load before wrapping, and banding or roping for strength. These options are specified at build time so the cycle can include them automatically.
The machine is chosen by the physical shape of the load more than the industry, which is why the same wrappers appear in food and building materials.
ターンテーブル式とロータリアーム式どちらを選びますか?
Choose a turntable for stable, square pallets at moderate throughput and lower cost; it is the standard warehouse machine. Choose a rotary-arm inline wrapper when the load is light, tall or unstable, when the line runs non-stop, or when the pallet must be conveyed without spinning.
プレストレッチとは?なぜ重要ですか?
Pre-stretch pulls the film to a fixed percentage elongation before it is laid on the load; the film then contracts and pulls the load together. A powered pre-stretch head gives a much tighter load and uses substantially less film per pallet than a simple friction carriage, so the film saving is a real operating cost.
軽量または Top heavy な荷はどう包装しますか?
Either use a rotary-arm wrapper so the load is never spun, or a turntable fitted with a top platen that holds the stack down while it turns. A slower start and lower torque, plus a top sheet, prevent the product from being dragged or thrown.
同じ機械で長尺製品を包装できますか?
No — a square-pallet turntable is not built for timber, profiles or doors. Long products are wrapped along their length on a 水平オービタル wrapper, and cylindrical rolls on a radial or gantry roll wrapper. Choose the machine that matches the load geometry.
輸出にはトップシートが必要ですか?
A top sheet laid over the load before wrapping sheds water and dust and is commonly used for sea freight and outdoor storage. Cold-chain and beverage loads are frequent users. It is added as an automatic cycle step, so request it when the machine is specified.
Send the maximum load weight, pallet dimensions, product shape (square, long or roll) and pallets per hour. We will specify the turntable, rotary-arm or orbital wrapper and the pre-stretch options.
手動テープ貼りから全自動フォールドシールまで、速度とカートン範囲に合わせて最適なシーラーを選びます。
| シナリオ | ケース/時 | カートン種 | 推奨タイプ | 主な特長 | 価格帯 |
|---|---|---|---|---|---|
| 小規模店舗・創業期 | 200-500 | 固定サイズ RSC | 半自動カートンシーラー (FA500) | 手動フラップ折り、上下テープ、作業員1名 | $1k-$5k |
| Mid-volume, multi-size | 500-1,200 | Variable RSC | 自動カートンシーラー(センター調整型) | 自動サイドガイド、手動フラップ折り | $5k-$15k |
| High-volume 24/7 | 1,200-2,000 | 固定サイズ RSC | 自動フォールドシール (FC500) | 自動フラップ折り、上下テープ、無人 | $15k-$35k |
| Eコマース / random sizes | 500-1,500 | ランダムサイズ / 混合 | ランダムサイズカートンシーラー | 自動サイズ検知、自動フラップ折り、テープ切断 | $25k-$55k |
| 重量級・特大カートン | 200-800 | Large / heavy | 重量級カートンシーラー | 強化フレーム、60mm テープ、駆動サイドベルト | $10k-$25k |
| Pharma / food | 300-1,000 | 標準 | ステンレス水洗対応 | 304SS、FDA ベルト、IP65 | $20k-$45k |
| 梱包機との連結 | 500-1,500 | 標準 | 封函機 + 梱包機コンビ | インラインシーラー + インライン梱包機、単一設置面積 | $20k-$40k |
| ホットメルトシール(テープレス) | 300-1,000 | 標準 RSC | ホットメルト接着カートンシーラー | 自動接着剤塗布、テープロスなし | $20k-$50k |
| パラメータ | Semi-Auto (FA500) | Auto Fold (FC500) | ランダムサイズ | Hot-Melt |
|---|---|---|---|---|
| 速度 (ケース/分) | 10-20 | 15-25 | 10-20 | 10-18 |
| Carton length | 150-600mm | 200-600mm | 150-800mm (auto) | 200-600mm |
| Carton width | 100-500mm | 150-500mm | 100-600mm (auto) | 150-500mm |
| Carton height | 80-600mm | 100-600mm | 80-700mm (auto) | 100-600mm |
| Tape width | 48-60mm | 48-60mm | 48-60mm | ホットメルト接着剤 |
| Flap folding | 手動 | 自動(上下) | Auto (random) | Auto |
| Changeover | 手動(2-3分) | レシピ(1-2分) | 自動(<30秒) | Recipe |
| Operators | 1 | 0 | 0 | 0 |
当サイトでは、サイトの運用、トラフィック分析、お問い合わせ対応のために Cookie を使用します。すべてを受け入れるか、設定を管理できます。当社の プライバシーポリシー および Cookie ポリシー.