TL;DR. Choosing between a turntable and a rotary arm stretch wrapper is the single most consequential decision in pallet wrapping. Turntables cost $3,000–$25,000 and handle most loads; rotary arms cost $25,000–$80,000 and are for unstable, tall or light loads that cannot rotate. This guide compares both, plus orbital and horizontal wrappers, and the 5 questions that decide which you actually need.
By Sarah Liu, Materials Engineer. Sarah has specified stretch wrappers for 9 years and has tested film containment on turntable vs rotary arm cells side by side.
1. The four wrapper families
Smithers’ 2025 stretch wrap report groups stretch wrappers into four families: turntable, rotary arm, orbital and horizontal. Turntables still hold ~70% of the market on stable pallet loads; rotary arms grow fastest on light or tall loads where rotation would tip the pallet.
PMMI’s secondary packaging survey notes that turntable wrappers remain the default first automation for small plants, because they are cheap, simple, and need only one operator to load the pallet.
2. Turntable vs rotary arm
| Dimension | Turntable | Rotary arm |
|---|---|---|
| Price | $3,000–$25,000 | $25,000–$80,000 |
| Speed | 20–40 pallets/hour | 30–60 pallets/hour |
| Max load weight | 2,000 kg | 2,000 kg |
| Unstable loads | No — they tip | Yes — pallet stays still |
| Tall loads (>1.8 m) | Marginal | Yes |
| Light loads (<200 kg) | Spin out | Yes |
| Floor space | Small (3×3 m) | Larger (5×5 m) |
3. When to choose which
| Your load | Recommended |
|---|---|
| Stable boxes, 500–1,500 kg, 1.2–1.8 m tall | Turntable |
| Light, tall, or unstable (bags, loose bundles) | Rotary arm |
| Long loads (lumber, tubing) | Orizontal / horizontal |
| Odd-shaped or very tall (>2.5 m) | Rotary arm |
| Under 20 pallets/hour, small budget | Semi-automatic turntable |
4. Supplier tiers
| Tier | Examples | Price |
|---|---|---|
| Global OEM | Lantech, Wulftec, Mosca, Tab, Atlanta | 2–3× |
| Regional builder | Domestic wrapper manufacturers | 1.2–1.6× |
| Direct-from-Asia | Chinese wrapper exporters | 0.4–0.7× |
5. Common pitfalls
- Buying a turntable for unstable loads — they tip in the first week.
- Under-specifying the carriage — 100% pre-stretch wastes film; buy adjustable 100–300%.
- Ignoring load height — a 2 m load needs a tall mast, not a standard one.
- No scale built in — you add a separate $3,000 scale later.
- Forgetting corner boards — film alone does not protect bagged loads.
