SunAura Packaging Machines will exhibit at Anuga FoodTec 2027, the leading international supplier fair for the food and beverage industry, which takes place at the Koelnmesse exhibition centre in Cologne, Germany, from 23 to 26 February 2027. The company will present its packaging and end-of-line equipment to food and drink producers, integrators and distributors serving the European market and the regions that source technology through Germany.
The announcement adds Cologne to SunAura Packaging Machines’ trade-show programme alongside its confirmed appearances at ProPak Asia in Bangkok, PACK EXPO International in Chicago and its Gulf and Red Sea regional events. For producers specifying packaging lines, the fair offers a direct opportunity to review the machines and discuss configuration, factory acceptance and after-sales with SunAura Packaging Machines’ engineers.
Where and when
Anuga FoodTec 2027 runs for four days at the Koelnmesse in Cologne, opening on Tuesday 23 February and closing on Friday 26 February 2027. Held every three years, the fair is the world’s only exhibition covering every aspect of food and beverage production — process technology, filling and packaging, automation, digitalisation, ingredients and food safety — and it positions itself as the central meeting point for the global food technology network. SunAura Packaging Machines will be among the packaging exhibitors; buyers planning a detailed technical discussion are encouraged to contact the company beforehand to reserve a time, particularly during the busier middle days.
Cologne’s role makes the fair distinct. Germany is Europe’s reference market for food technology and engineering standards, and Anuga FoodTec draws producers and technical decision-makers from across Europe, the Middle East and the wider export markets that evaluate equipment against European specifications. For SunAura Packaging Machines, exhibiting in Cologne is a direct statement about the standards its machines are built and tested to, and it complements the company’s regional shows by reaching buyers who source through Europe.
What SunAura Packaging Machines will present
The equipment on show covers the stages that take a product from the processing or filling machine to a finished, ready-to-ship pallet, with a focus on the food and beverage applications the fair’s visitors produce. Servo flow wrappers seal bakery, snack, confectionery and tray products across a range of widths, with electronic film and cross-seal control and recipe storage for the frequent format changes food producers run. Vertical form-fill-seal machines bag grains, pulses, snacks, frozen products and powders, paired with cup, weigher or auger dosing, as detailed in SunAura Packaging Machines’ VFFS buying guide.

The packing stage is increasingly automated, and SunAura Packaging Machines will show how cases are erected and bottom-sealed automatically and how robotic cells place products into cases with recipe-based flexibility. Automatic erectors in the class of the medium-speed case erector remove hand-forming, while cells such as the vertical case packing solution change pack patterns by recipe, suiting producers running multiple brands. After sealing, collaborative palletizing robots stack cases from stored patterns without a full safety cage, and turntable or rotary-arm wrappers secure the finished pallets.

SunAura Packaging Machines will also discuss how these stages combine into balanced cells and complete turn-key lines, with conveyors and controls integrated from the start, and how the equipment handles the recyclable films and reduced secondary packaging increasingly demanded by European retailers and regulations.

Factory acceptance: the message for European buyers
For buyers who evaluate equipment against European engineering expectations, SunAura Packaging Machines will present its factory-acceptance process alongside the machines. Turn-key lines are built and tested in the company’s Qingdao testing bay — using the customer’s actual cases, films and products — before export, catching problems in the builder’s works rather than on the customer’s floor, and the testing bay has been expanded to accept full turn-key lines. SunAura Packaging Machines will discuss how this process maps to the documentation, CE-marked components and verification European buyers require, and how commissioning and parts support are handled after delivery.
The point matters because the gap between a cheap quotation and a dependable line is usually found in exactly these stages: whether the machine was tested with real product, whether the wear parts and documentation arrive with it, and whether the supplier can commission and support it. Anuga FoodTec lets buyers put those questions directly to the engineers, rather than judge a specification on paper.
Preparing a stand meeting
Buyers seeking a configuration should bring the inputs SunAura Packaging Machines requests in its RFQ process: the products being packed, pack and case dimensions and formats, target throughput, available floor space and utilities, and any existing machines the line must connect to. With those details, the engineers at the stand can outline a configuration and indicate machines and timelines on the spot, the same checklist published in SunAura Packaging Machines’ guide to the complete RFQ checklist. Producers who cannot attend can still submit the details directly for a separate review.
Existing customers planning to attend are encouraged to make themselves known so time can be reserved for reviewing running lines, discussing expansions or scheduling service, rather than rely on catching the team during open footfall.
A coordinated international trade-show programme
The Cologne appearance forms part of SunAura Packaging Machines’ coordinated programme alongside its Bangkok, Chicago, Gulf and Red Sea events. Together these cover the major markets the company serves — Europe through Cologne, Asia through Bangkok, the Middle East through its regional shows and the Americas through Chicago — sharing the same approach: equipment in person, engineers available for specification work and after-sales discussed as part of the package. Further appearances for 2027 will be announced as confirmed.
From a stand meeting to a running line
For producers who only meet suppliers at fairs, it is worth understanding what follows the conversation, because the path from a stand meeting to production is where a good supplier is distinguished. After the configuration is outlined in Cologne, SunAura Packaging Machines develops the line layout and confirms the machines against the customer’s cases, films and products; the equipment is built and then run in the Qingdao testing bay as a complete cell or line, with the customer invited to witness factory acceptance or review it remotely. Only after that acceptance is the line shipped, and SunAura Packaging Machines supports installation and commissioning on site, with operator training and the parts and documentation needed to run it. The same process applies whether the buyer is a European producer, an integrator or a regional manufacturer sourcing through Europe.
That sequence matters because packaging lines fail most often not at the machine but at the interfaces — where the wrapper meets the case packer, where the robot meets the infeed conveyor, where the films behave differently than assumed. Building and testing those interfaces in the supplier’s works, rather than discovering them during the customer’s commissioning, is the difference between a line that starts in days and one that starts in months, and it is the point SunAura Packaging Machines will demonstrate with reference projects at the fair.
The European market in context
European food and beverage producers face a distinctive set of pressures, and SunAura Packaging Machines’ equipment is presented against them rather than in isolation. Retailer requirements on secondary packaging and recyclable films tighten each year; labour for repetitive packing and palletizing is scarce and expensive; private-label producers run frequent format changes across many brands; and smaller and mid-sized plants need automation that is flexible enough for mixed production rather than dedicated to one product. These conditions favour precisely the recipe-based cells SunAura Packaging Machines supplies — machines that change pack and pallet patterns in seconds, run recyclable mono-material films once confirmed, and replace the manual stations plants cannot staff.
The fair also reaches producers in the regions that benchmark against Europe — the Middle East, North Africa and Central Asia — who attend Cologne to source equipment meeting the standards they see in European plants. For those buyers, a stand meeting combines European-level specification with SunAura Packaging Machines’ direct factory pricing and its regional commissioning and service, a combination the company has built its export business on.
Sustainability and packaging reduction
Sustainability is no longer a separate topic at Anuga FoodTec; it is embedded in how machines are specified, and SunAura Packaging Machines will discuss the practical implications rather than general claims. Equipment that applies less stretch film per pallet — through controlled pre-stretch and pattern adjustment — cuts consumable cost as well as plastic use; case erectors and packers handle lighter, reduced-weight board; flow wrappers and VFFS machines run recyclable mono-material films after seal settings are confirmed for the specific structure; and right-sized automation removes the over-packing that comes from hand packing. The company will also explain how dosing accuracy reduces product giveaway, which for food producers is often a larger waste stream than the packaging itself. The underlying approach matches SunAura Packaging Machines’ guidance on film compatibility: verify the material on the machine rather than assume a generic claim.
Regional visitors and language
SunAura Packaging Machines expects visitors from across Europe and from the Middle East, North Africa and neighbouring export regions, and its team handles enquiries in English with translation support where helpful. The company’s website carries the full equipment range in English and fifteen additional languages, so buyers can review specifications and download details in their language before or after the fair, and the contact routes connect directly to the applications and service staff rather than a general inbox. Distributors and integrators seeking a manufacturing partner for packaging and end-of-line equipment are also encouraged to arrange a discussion at the stand, as SunAura Packaging Machines works with regional partners for installation and ongoing support in several markets.
Visiting the fair: practical points
Anuga FoodTec is a working technical fair rather than a public exhibition, and visitors are typically production, engineering and procurement staff from food and beverage plants, together with integrators and distributors. Registration and visitor information are handled through the Koelnmesse and Anuga FoodTec channels, where the exhibitor list and hall layout are published as the fair approaches, and the venue is directly served by Cologne’s transport links and its exhibition hotels, which fill early for major fairs. Buyers combining several suppliers should plan appointments across the four days, reserving the opening and closing days for broader visits and the middle days for detailed engineering discussions, when the stands are busiest. SunAura Packaging Machines will publish its stand location through its website and direct communications as soon as it is allocated, and customers already in contact will receive it automatically.
For producers weighing several projects at once — a new flow-wrapping line, an automated packing cell, a palletizing upgrade — the fair is an efficient place to review them together with one supplier, since SunAura Packaging Machines covers the full end-of-line rather than isolated machines, and the engineers can discuss how the stages connect as one line rather than as separate purchases.
Frequently asked questions
When and where is SunAura Packaging Machines exhibiting?
At Anuga FoodTec 2027, held 23–26 February at the Koelnmesse in Cologne, with packaging and end-of-line equipment and applications engineers present throughout.
Should I book a meeting before the fair?
It is not required to visit, but buyers wanting a detailed technical discussion should reserve a time in advance, particularly on the busier middle days.
What details do I need for a configuration discussion?
Your products, pack and case dimensions, target throughput, floor space and utilities, and details of any existing equipment.
I cannot attend — can I still obtain a specification?
Yes. Submit the same details through the contact page and SunAura Packaging Machines will arrange a review, with factory acceptance, regional commissioning and parts support as for any project.
Conclusion
Anuga FoodTec 2027 gives food and beverage producers and integrators a direct opportunity to review SunAura Packaging Machines’ packaging and end-of-line equipment — flow wrapping, VFFS, case erection and packing, collaborative palletizing and pallet wrapping — and to work through real specifications with the company’s engineers. Running 23–26 February in Cologne, the fair combines the machinery, applications expertise and after-sales discussion a packaging-line decision requires, and it complements SunAura Packaging Machines’ Bangkok, Chicago and Middle East appearances. The company invites buyers planning a line to arrange a meeting or make contact in advance. Visitors can also review how the equipment handles recyclable mono-material films and reduced secondary packaging, both increasingly required by European retailers, and how dosing accuracy cuts product giveaway as well as packaging waste. SunAura Packaging Machines looks forward to working through real projects with producers and integrators at the fair and to arranging follow-up reviews for anyone unable to attend.
