Case Sealing & Strapping Machine FP500AJ-301A
Máquina integrada de selagem e cintagem de caixas que fecha e cintam as caixas em um percurso para economizar espaço e mão de obra.
- Especificações Verificadas de Fábrica
- Inline Ready
- Custom Builds

Descrição do Produto
The Case Sealing & Strapping Machine FP500AJ-301A is an industrial-grade machine from the SunAura Packaging Machines end-of-line packaging range, engineered to deliver repeatable, high-quality performance in continuous production. It is built around a rigid steel frame and proven drive and sealing components selected for long service life and straightforward maintenance.
On verified factory data, accommodating cartons from L250 × W120 × H130 mm up to Lunlimited × W500 × H500 mm, with 220V/380V 50Hz. The operating parameters are confirmed in the specification table below and can be reviewed against your own containers and target output.
Por funcionar bem tanto como unidade independente quanto integrada a uma linha de embalagem mais ampla, a FP500AJ-301A suits manufacturers looking to reduce manual handling and raise the consistency of their end-of-line process. Beyond the standard build, SunAura Packaging Machines engineers non-standard sizes, layouts and flow directions to match each plant.
Engineered Features
Combines sealing and PP strapping on one frame to save floor space and labor
Combines sealing and PP strapping on one frame to save floor space and labor.
A shared control synchronizes the sealing and strapping cycles for continuous running
A shared control synchronizes the sealing and strapping cycles for continuous running.
Supports tape 48/60/75 mm and strap 9-15 mm for flexible consumables
Supports tape 48/60/75 mm and strap 9-15 mm for flexible consumables.
Fold-over and e-commerce U-type layouts are available to suit the product
Fold-over and e-commerce U-type layouts are available to suit the product.
Especificações Técnicas
Especificações de fábrica verificadas para a FP500AJ-301A. Os valores podem ser personalizados para a sua aplicação.
| Modelo | SDW- FP500AJ+301A |
| Min. Carton Size | L250 × W120 × H130 mm |
| Max. Carton Size | Lunlimited × W500 × H500 mm |
| Alimentação | 220V/380V 50Hz |
| Consumo de Potência | 0.7 kW |
| Largura da Fita | W48、60、 75mm(select one) |
| Strap Specification | W9~15 mm,thk0.55~0.8 mm |
Produtos e Setores Atendidos
Princípio de Operação
Infeed
Cartons enter the combined frame.
Selagem
Flaps are folded and tape applied.
Cintagem
A PP strap is automatically fed, tensioned and sealed.
Saída
Sealed and banded cartons are discharged.
Control
One control system synchronizes both stations.
Imagens Reais da Máquina
Photographs of the actual FP500AJ-301A, supplied and supported directly by SunAura Packaging Machines.

Why Choose the FP500AJ-301A
Reliable Sealing / Sealing Heads
Precision heads apply tape, strap or film evenly, with stable tails and consistent bond strength.
Simple Operator Control
A clear control interface and logical layout shorten training and reduce dependence on specialist staff.
Sensors & Alarms
Missing-blank, low-consumable and overload alarms prevent empty cycles and protect the machine.
Inline Ready
The machine integrates readily with conveyors and upstream/downstream equipment in a full end-of-line system.
Space-Efficient Layout
A compact, optimized footprint saves floor space while keeping maintenance access open.
Custom Engineering
Non-standard sizes, layouts and directions are engineered to match your exact product and plant.
Perguntas Frequentes
Yes. Both stations share a frame and control, running in a synchronized continuous cycle.
Tape 48/60/75 mm and PP strap around 9-15 mm are typical, as listed in the data.
Yes, including a U-type line configured for e-commerce order packing.
Which Case Sealer Matches Your Carton Line?
From manual taping to fully automatic fold-and-seal, match speed and carton range to the right sealer.
| Scenario | Cases / Hour | Carton Type | Recommended Type | Key Features | Budget Tier |
|---|---|---|---|---|---|
| Small shop / startup | 200-500 | Fixed-size RSC | Semi-auto case sealer (FA500) | Manual fold, top/bottom tape, 1 operator | $1k-$5k |
| Mid-volume, multi-size | 500-1,200 | Variable RSC | Auto carton sealer (center-adjust) | Auto side guides, hand fold flaps | $5k-$15k |
| High-volume 24/7 | 1,200-2,000 | Fixed-size RSC | Automatic fold-and-seal (FC500) | Auto flap fold, bottom + top tape, zero manual | $15k-$35k |
| E-commerce / random sizes | 500-1,500 | Random-size / mixed | Random-size case sealer | Auto-size detection, auto flap fold, tape cutoff | $25k-$55k |
| Heavy / oversize cartons | 200-800 | Large / heavy | Heavy-duty case sealer | Reinforced frame, 60mm tape, powered side belts | $10k-$25k |
| Pharma / food | 300-1,000 | Standard | Stainless-steel washdown | 304SS, FDA belts, IP65 | $20k-$45k |
| Integration w/ strapping | 500-1,500 | Standard | Case sealer + strapping combo | Inline sealer + inline strapper, single footprint | $20k-$40k |
| Hot-melt sealing (no tape) | 300-1,000 | Standard RSC | Hot-melt glue case sealer | Auto glue application, no tape waste | $20k-$50k |
Case Sealer Comparison
| Parameter | Semi-Auto (FA500) | Auto Fold (FC500) | Random-Size | Hot-Melt |
|---|---|---|---|---|
| Speed (cases/min) | 10-20 | 15-25 | 10-20 | 10-18 |
| Carton length | 150-600mm | 200-600mm | 150-800mm (auto) | 200-600mm |
| Carton width | 100-500mm | 150-500mm | 100-600mm (auto) | 150-500mm |
| Carton height | 80-600mm | 100-600mm | 80-700mm (auto) | 100-600mm |
| Tape width | 48-60mm | 48-60mm | 48-60mm | Hot-melt glue |
| Flap folding | Manual | Auto (bottom + top) | Auto (random) | Auto |
| Changeover | Manual (2-3 min) | Recipe (1-2 min) | Auto (<30 sec) | Recipe |
| Operators | 1 | 0 | 0 | 0 |
Produtos Relacionados
Converse sobre sua linha de embalagem com nossos engenheiros
Envie-nos as dimensões do seu produto e a produção desejada, e recomendaremos a máquina e a configuração de linha ideais.




