Linha de Selagem de Caixas Tipo I Totalmente Automática FE500-FH500L
Linha de selagem de caixas tipo I que conecta seladoras de linha reta e de borda de canto para fechar todas as emendas sem re-manuseio.
- Especificações Verificadas de Fábrica
- Inline Ready
- Custom Builds

Descrição do Produto
The Fully Automatic I-Type Carton Sealing Line FE500-FH500L is an industrial-grade machine from the SunAura Packaging Machines end-of-line packaging range, engineered to deliver repeatable, high-quality performance in continuous production. It is built around a rigid steel frame and proven drive and sealing components selected for long service life and straightforward maintenance.
Segundo dados verificados de fábrica, a máquina opera a 5~ 6 cartons/min, accommodating cartons from L340 × W200 × H 180 mm up to L 600 × W500 × H500 mm, with 220/380V 50Hz. The operating parameters are confirmed in the specification table below and can be reviewed against your own containers and target output.
Por funcionar bem tanto como unidade independente quanto integrada a uma linha de embalagem mais ampla, a FE500-FH500L suits manufacturers looking to reduce manual handling and raise the consistency of their end-of-line process. Beyond the standard build, SunAura Packaging Machines engineers non-standard sizes, layouts and flow directions to match each plant.
Engineered Features
Links a straight-line sealer with a four-corner I-pattern sealer for complete closure
Links a straight-line sealer with a four-corner I-pattern sealer for complete closure.
The L-type layout turns cases to seal all seams without manual re-handling
The L-type layout turns cases to seal all seams without manual re-handling.
Semi and fully automatic configurations match different line rates
Semi and fully automatic configurations match different line rates.
Flow direction (left/right turn) is engineered to order for your layout
Flow direction (left/right turn) is engineered to order for your layout.
Especificações Técnicas
Especificações de fábrica verificadas para a FE500-FH500L. Os valores podem ser personalizados para a sua aplicação.
| Modelo | SDW- FE500+ SDW-FH500L |
| Min. Carton Size | L340 × W200 × H 180 mm |
| Max. Carton Size | L 600 × W500 × H500 mm |
| Velocidade de Selagem | 5~ 6 cartons/min |
| Dimensões da Máquina | L1160 × W975 × H1330 mm |
| Alimentação | 220/380V 50Hz |
| Pressão de Ar | 6kgf/cm2、1 00NL/min |
| Consumo de Potência | 0.8 kW |
Produtos e Setores Atendidos
Princípio de Operação
Straight-Line Seal
The first sealer applies top and bottom tape.
90 Turn
An L conveyor turns the case.
Corner Seal
The second sealer tapes the four corner edges.
Saída
The fully sealed case exits the line.
Changeover
Size and flow direction are set to order.
Imagens Reais da Máquina
Photographs of the actual FE500-FH500L, supplied and supported directly by SunAura Packaging Machines.

Why Choose the FE500-FH500L
Custom Engineering
Non-standard sizes, layouts and directions are engineered to match your exact product and plant.
Rigid Industrial Build
A precision-fabricated steel frame and wear-resistant components deliver long, stable production with minimal maintenance.
Fast Repeatable Changeover
Clearly marked guides and stored settings make size changes quick and consistent between runs.
Reliable Sealing / Sealing Heads
Precision heads apply tape, strap or film evenly, with stable tails and consistent bond strength.
Simple Operator Control
A clear control interface and logical layout shorten training and reduce dependence on specialist staff.
Sensors & Alarms
Missing-blank, low-consumable and overload alarms prevent empty cycles and protect the machine.
Perguntas Frequentes
The rated throughput is 5~ 6 cartons/min, varying with container dimensions, materials and configuration.
A straight-line sealer, an L-type turning conveyor and a corner-edge sealer, matched as one system.
Standard layouts turn left; right-turn and custom directions are engineered on request.
Both configurations are available to match your throughput.
Produtos Relacionados
Converse sobre sua linha de embalagem com nossos engenheiros
Envie-nos as dimensões do seu produto e a produção desejada, e recomendaremos a máquina e a configuração de linha ideais.




