High-Speed Carton Erector & Bottom Sealer K40T
Montadora automática de caixas que pega, forma, dobra e sela a base das caixas de papelão ondulado prontas para embalagem.
- Especificações Verificadas de Fábrica
- Inline Ready
- Custom Builds

Descrição do Produto
The High-Speed Carton Erector & Bottom Sealer K40T is an industrial-grade machine from the SunAura Packaging Machines end-of-line packaging range, engineered to deliver repeatable, high-quality performance in continuous production. It is built around a rigid steel frame and proven drive and sealing components selected for long service life and straightforward maintenance.
Segundo dados verificados de fábrica, a máquina opera a 20~40 /min, accommodating cartons from 99.9% up to the rated maximum, with 3P AC380V 50Hz 2.5 kW. The operating parameters are confirmed in the specification table below and can be reviewed against your own containers and target output.
Por funcionar bem tanto como unidade independente quanto integrada a uma linha de embalagem mais ampla, a K40T suits manufacturers looking to reduce manual handling and raise the consistency of their end-of-line process. Beyond the standard build, SunAura Packaging Machines engineers non-standard sizes, layouts and flow directions to match each plant.
Engineered Features
Automatically picks, forms, folds and seals the bottom of flat corrugated blanks
Automatically picks, forms, folds and seals the bottom of flat corrugated blanks.
Bottom sealing by tape, staples or hot-melt according to the selected model
Bottom sealing by tape, staples or hot-melt according to the selected model.
Servo and robotic models deliver fast, repeatable forming across board grades
Servo and robotic models deliver fast, repeatable forming across board grades.
Integrates directly with downstream packing and sealing equipment
Integrates directly with downstream packing and sealing equipment.
Low power and air consumption with easy, accessible maintenance
Low power and air consumption with easy, accessible maintenance.
Especificações Técnicas
Especificações de fábrica verificadas para a K40T. Os valores podem ser personalizados para a sua aplicação.
| Modelo | SDW-K40T |
| Alimentação | 3P AC380V 50Hz 2.5 kW |
| Pressão de Ar | 0.4MP~0.6 MPa |
| Consumo de Ar | 30m |
| Overall Dimensions | L3300 mm × W1500 mm × H2200 mm |
| Adjustment Range | W=190-330 × L+W=400-690 × 1/2W+H=220-420 |
| Peso da Máquina | 2000 kg |
| Working Speed | 20~40 /min |
| Standalone Throughput | ≥95% |
| Largura da Fita | 48 mm-72 mm |
| Forming Qualification Rate | 99.9% |
| Carton Loss | ≤1.5‰ |
| Case Erection Method | vacuum suction, side forming |
Produtos e Setores Atendidos
Princípio de Operação
Blank Magazine
Flat cartons are held in a vertical magazine.
Captura
Suction cups draw one blank at a time.
Formação
The case is opened and squared by servo, robotic or pneumatic arms.
Bottom Seal
Bottom flaps are folded and sealed by tape, staples or hot-melt.
Saída
Formed cases are conveyed to packing.
Imagens Reais da Máquina
Photographs of the actual K40T, supplied and supported directly by SunAura Packaging Machines.

Why Choose the K40T
Rigid Industrial Build
A precision-fabricated steel frame and wear-resistant components deliver long, stable production with minimal maintenance.
Fast Repeatable Changeover
Clearly marked guides and stored settings make size changes quick and consistent between runs.
Reliable Sealing / Sealing Heads
Precision heads apply tape, strap or film evenly, with stable tails and consistent bond strength.
Simple Operator Control
A clear control interface and logical layout shorten training and reduce dependence on specialist staff.
Sensors & Alarms
Missing-blank, low-consumable and overload alarms prevent empty cycles and protect the machine.
Inline Ready
The machine integrates readily with conveyors and upstream/downstream equipment in a full end-of-line system.
Perguntas Frequentes
The rated throughput is 20~40 /min, varying with container dimensions, materials and configuration.
They are stored in a magazine that can be replenished without stopping the machine.
Each model uses one method; select the version that matches your consumables.
Forming speed depends on the model and case size, as listed in the specifications.
Produtos Relacionados
Converse sobre sua linha de embalagem com nossos engenheiros
Envie-nos as dimensões do seu produto e a produção desejada, e recomendaremos a máquina e a configuração de linha ideais.



