Semi-Automatic E-commerce Corner-Edge Case Sealer FG400LDS
A corner-edge case sealer that tapes the four corner edges in an I pattern to reinforce cases for secure handling.
- Factory-Verified Specs
- Inline Ready
- Custom Builds

Product Description
The Semi-Automatic E-commerce Corner-Edge Case Sealer FG400LDS is an industrial-grade machine from the SunAura Packaging Machines end-of-line packaging range, engineered to deliver repeatable, high-quality performance in continuous production. It is built around a rigid steel frame and proven drive and sealing components selected for long service life and straightforward maintenance.
On verified factory data, the machine runs at 6~10 cartons/min, accommodating cartons from L190 × W120 × H100 mm up to L400 × W400 × H300 mm, with 220/380V 50Hz. The operating parameters are confirmed in the specification table below and can be reviewed against your own containers and target output.
Because it works equally well as a standalone unit or integrated into a wider packaging line, the FG400LDS suits manufacturers looking to reduce manual handling and raise the consistency of their end-of-line process. Beyond the standard build, SunAura Packaging Machines engineers non-standard sizes, layouts and flow directions to match each plant.
Engineered Features
Incorporates a 90° case-turning pusher to handle small e-commerce cartons
Incorporates a 90° case-turning pusher to handle small e-commerce cartons.
Width and height are adjusted manually at changeover for a repeatable, tool-light process
Width and height are adjusted manually at changeover for a repeatable, tool-light process.
A straight-line sealer fits upstream, with corner edges sealed in an I (plus) pattern
A straight-line sealer fits upstream, with corner edges sealed in an I (plus) pattern.
The tape applicator uses a precise, rigid mechanism that runs smoothly, seals evenly and lasts
The tape applicator uses a precise, rigid mechanism that runs smoothly, seals evenly and lasts.
Beyond the standard specification, custom non-standard builds match your exact line and container dimensions
Beyond the standard specification, custom non-standard builds match your exact line and container dimensions.
Seals the four corner edges in an I (H) pattern to reinforce case strength
Seals the four corner edges in an I (H) pattern to reinforce case strength.
An L-type or inline layout adapts to available floor space and flow direction
An L-type or inline layout adapts to available floor space and flow direction.
Technical Specifications
Verified factory specifications for the FG400LDS. Values can be customized for your application.
| Model | SDW- FG400LDS |
| Min. Carton Size | L190 × W120 × H100 mm |
| Max. Carton Size | L400 × W400 × H300 mm |
| Belt Speed | 6~10 cartons/min |
| Machine Dimensions | L2540 × W1130 × H1350 mm |
| Power Supply | 220/380V 50Hz |
| Air Pressure | 6kgf/cm²、 120NL/min |
| Power Consumption | 0.6 kW |
| Tape Width | W48 |
| Machine Weight | 400 kg |
Products & Industries Served
Working Principle
Infeed & Turn
Cartons enter and are turned as required by the L or inline layout.
Corner Sealing
Tape heads seal the four vertical corner edges.
Pair Sealing
It usually follows a straight-line sealer to close all seams.
Discharge
Fully reinforced cartons move to palletizing.
Changeover
Size is adjusted manually between runs.
Real Machine Images
Photographs of the actual FG400LDS, supplied and supported directly by SunAura Packaging Machines.

Why Choose the FG400LDS
Reliable Sealing / Sealing Heads
Precision heads apply tape, strap or film evenly, with stable tails and consistent bond strength.
Simple Operator Control
A clear control interface and logical layout shorten training and reduce dependence on specialist staff.
Sensors & Alarms
Missing-blank, low-consumable and overload alarms prevent empty cycles and protect the machine.
Inline Ready
The machine integrates readily with conveyors and upstream/downstream equipment in a full end-of-line system.
Space-Efficient Layout
A compact, optimized footprint saves floor space while keeping maintenance access open.
Custom Engineering
Non-standard sizes, layouts and directions are engineered to match your exact product and plant.
Frequently Asked Questions
The rated throughput is 6~10 cartons/min, varying with container dimensions, materials and configuration.
Tape is applied down the four corner edges, adding strength for stacking and transport.
It is usually paired with one so the top, bottom and corner seams are all sealed.
Yes. A 90-degree turning pusher is included to process small cartons accurately.
Related Products
Discuss your packaging line with our engineers
Send us your product dimensions and target output, and we will recommend the right machine and line configuration.




