Hot-Melt Carton Erector & Bottom Sealer K20TH
An automatic carton erector that picks, forms, folds and seals the bottom of corrugated cases ready for packing.
- Factory-Verified Specs
- Inline Ready
- Custom Builds

Product Description
The Hot-Melt Carton Erector & Bottom Sealer K20TH is an industrial-grade machine from the SunAura Packaging Machines end-of-line packaging range, engineered to deliver repeatable, high-quality performance in continuous production. It is built around a rigid steel frame and proven drive and sealing components selected for long service life and straightforward maintenance.
On verified factory data, the machine runs at 10-12 min (stable), accommodating cartons from 10-12 min (stable) up to the rated maximum, with 220/380V 50Hz. The operating parameters are confirmed in the specification table below and can be reviewed against your own containers and target output.
Because it works equally well as a standalone unit or integrated into a wider packaging line, the K20TH suits manufacturers looking to reduce manual handling and raise the consistency of their end-of-line process. Beyond the standard build, SunAura Packaging Machines engineers non-standard sizes, layouts and flow directions to match each plant.
Engineered Features
Uses a pneumatic cylinder forming mechanism for reliable, low-maintenance forming
Uses a pneumatic cylinder forming mechanism for reliable, low-maintenance forming.
Forming speed varies with carton dimensions and the number of staples applied
On this K20TH hot-melt erector, verified forming speed is 10–12 cartons/min (stable) on cartons L300–500 mm, using granular hot-melt glue.
Works in-line or standalone, completing pickup, forming, bottom folding and sealing in one cycle
Works in-line or standalone, completing pickup, forming, bottom folding and sealing in one cycle.
Sensors alarm for low tape or missing blanks to prevent empty or unsealed cycles
Sensors alarm for low tape or missing blanks to prevent empty or unsealed cycles.
A large-capacity magazine stores flat blanks and refills without stopping the line
A large-capacity magazine stores flat blanks and refills without stopping the line.
Best suited to batch runs of a single carton size, with adjustment between runs
Best suited to batch runs of a single carton size, with adjustment between runs.
The standard working height is 650 mm, aligned to common conveyor elevations
The standard working height is 650 mm, aligned to common conveyor elevations.
Beyond the standard specification, custom non-standard builds match your exact line and container dimensions
Beyond the standard specification, custom non-standard builds match your exact line and container dimensions.
Technical Specifications
Verified factory specifications for the K20TH. Values can be customized for your application.
| Model | SDW- K20TH |
| Applicable Cartons | 300≤l≤500 mm |
| Forming Speed | 10-12 min (stable) |
| Machine Dimensions | L3000 × W1950 × H1500 mm |
| Power Supply | 220/380V 50Hz |
| Air Pressure | 6kgt/cm². 450NL/min |
| Applicable Material | granular hot-melt |
| Machine Weight | 400 kg |
Products & Industries Served
Working Principle
Blank Magazine
Flat cartons are held in a vertical magazine.
Pickup
Suction cups draw one blank at a time.
Forming
The case is opened and squared by servo, robotic or pneumatic arms.
Bottom Seal
Bottom flaps are folded and sealed by tape, staples or hot-melt.
Discharge
Formed cases are conveyed to packing.
Real Machine Images
Photographs of the actual K20TH, supplied and supported directly by SunAura Packaging Machines.

Why Choose the K20TH
Fast Repeatable Changeover
Clearly marked guides and stored settings make size changes quick and consistent between runs.
Reliable Sealing / Sealing Heads
Precision heads apply tape, strap or film evenly, with stable tails and consistent bond strength.
Simple Operator Control
A clear control interface and logical layout shorten training and reduce dependence on specialist staff.
Sensors & Alarms
Missing-blank, low-consumable and overload alarms prevent empty cycles and protect the machine.
Inline Ready
The machine integrates readily with conveyors and upstream/downstream equipment in a full end-of-line system.
Space-Efficient Layout
A compact, optimized footprint saves floor space while keeping maintenance access open.
Frequently Asked Questions
The rated throughput is 10-12 min (stable), varying with container dimensions, materials and configuration.
They are stored in a magazine that can be replenished without stopping the machine.
Each model uses one method; select the version that matches your consumables.
Forming speed depends on the model and case size, as listed in the specifications.
Related Products
Discuss your packaging line with our engineers
Send us your product dimensions and target output, and we will recommend the right machine and line configuration.



