Fold Case Sealer FC500H
An automatic fold-over case sealer that pneumatically folds top flaps and applies tape for higher-throughput lines.
- Factory-Verified Specs
- Inline Ready
- Custom Builds

Product Description
The Fold Case Sealer FC500H is an industrial-grade machine from the SunAura Packaging Machines end-of-line packaging range, engineered to deliver repeatable, high-quality performance in continuous production. It is built around a rigid steel frame and proven drive and sealing components selected for long service life and straightforward maintenance.
On verified factory data, the machine runs at 20 m/min(10~15 cartons/min), accommodating cartons from L200 × W200 × H150 mm up to L400 × W400 × H400 mm, with 220/380V 50Hz. The operating parameters are confirmed in the specification table below and can be reviewed against your own containers and target output.
Because it works equally well as a standalone unit or integrated into a wider packaging line, the FC500H suits manufacturers looking to reduce manual handling and raise the consistency of their end-of-line process. Beyond the standard build, SunAura Packaging Machines engineers non-standard sizes, layouts and flow directions to match each plant.
Engineered Features
Automatically folds top flaps and completes straight-line sealing, in-line or standalone
Automatically folds top flaps and completes straight-line sealing, in-line or standalone.
Width and height are adjusted manually at changeover for a repeatable, tool-light process
Width and height are adjusted manually at changeover for a repeatable, tool-light process.
Driven by side belts on both sides for positive, balanced transfer
Driven by side belts on both sides for positive, balanced transfer.
The standard working height is 600 mm, aligned to common conveyor elevations
The standard working height is 600 mm, aligned to common conveyor elevations.
Beyond the standard specification, custom non-standard builds match your exact line and container dimensions
Beyond the standard specification, custom non-standard builds match your exact line and container dimensions.
Pneumatic arms automatically fold the top flaps before tape application to reduce manual handling
Pneumatic arms automatically fold the top flaps before tape application to reduce manual handling.
Available in low, medium and high-speed configurations to match your line rate
Available in low, medium and high-speed configurations to match your line rate.
Technical Specifications
Verified factory specifications for the FC500H. Values can be customized for your application.
| Model | SDW-FC500H |
| Min. Carton Size | L200 × W200 × H150 mm |
| Max. Carton Size | L400 × W400 × H400 mm |
| Belt Speed | 20 m/min(10~15 cartons/min) |
| Machine Dimensions | L1700 × W930 × H1510 mm |
| Power Supply | 220/380V 50Hz |
| Air Pressure | 6kgf/cm’. 40NL/min |
| Applicable Material | granular hot-melt |
Products & Industries Served
Working Principle
Infeed
Cartons enter on side drive belts.
Automatic Flap Fold
Pneumatic arms fold the top flaps automatically.
Taping
Top and bottom tape is applied in one pass.
Discharge
Sealed cartons continue downstream.
Changeover
Size is adjusted manually or automatically by model.
Real Machine Images
Photographs of the actual FC500H, supplied and supported directly by SunAura Packaging Machines.

Why Choose the FC500H
Sensors & Alarms
Missing-blank, low-consumable and overload alarms prevent empty cycles and protect the machine.
Inline Ready
The machine integrates readily with conveyors and upstream/downstream equipment in a full end-of-line system.
Space-Efficient Layout
A compact, optimized footprint saves floor space while keeping maintenance access open.
Custom Engineering
Non-standard sizes, layouts and directions are engineered to match your exact product and plant.
Rigid Industrial Build
A precision-fabricated steel frame and wear-resistant components deliver long, stable production with minimal maintenance.
Fast Repeatable Changeover
Clearly marked guides and stored settings make size changes quick and consistent between runs.
Frequently Asked Questions
The rated throughput is 20 m/min(10~15 cartons/min), varying with container dimensions, materials and configuration.
Yes. Pneumatic folding arms close the flaps before tape is applied, reducing manual handling.
Low, medium and high-speed versions are available; the rated throughput is given in the technical data.
It works standalone or integrated with erectors, packers and strapping machines.
Related Products
Discuss your packaging line with our engineers
Send us your product dimensions and target output, and we will recommend the right machine and line configuration.




