Case Sealing & Strapping Machine FP500C-301A
An integrated case sealing and strapping machine that closes and bands cartons in one pass to save space and labor.
- Factory-Verified Specs
- Inline Ready
- Custom Builds

Product Description
The Case Sealing & Strapping Machine FP500C-301A is an industrial-grade machine from the SunAura Packaging Machines end-of-line packaging range, engineered to deliver repeatable, high-quality performance in continuous production. It is built around a rigid steel frame and proven drive and sealing components selected for long service life and straightforward maintenance.
On verified factory data, accommodating cartons from L 600 × W500 × H500 mm up to Lunlimited × W500 × H500 mm, with 220V/380V 50Hz. The operating parameters are confirmed in the specification table below and can be reviewed against your own containers and target output.
Because it works equally well as a standalone unit or integrated into a wider packaging line, the FP500C-301A suits manufacturers looking to reduce manual handling and raise the consistency of their end-of-line process. Beyond the standard build, SunAura Packaging Machines engineers non-standard sizes, layouts and flow directions to match each plant.
Engineered Features
Combines sealing and PP strapping on one frame to save floor space and labor
Combines sealing and PP strapping on one frame to save floor space and labor.
A shared control synchronizes the sealing and strapping cycles for continuous running
A shared control synchronizes the sealing and strapping cycles for continuous running.
Supports tape 48/60/75 mm and strap 9-15 mm for flexible consumables
Supports tape 48/60/75 mm and strap 9-15 mm for flexible consumables.
Fold-over and e-commerce U-type layouts are available to suit the product
Fold-over and e-commerce U-type layouts are available to suit the product.
Technical Specifications
Verified factory specifications for the FP500C-301A. Values can be customized for your application.
| Model | SDW- FP500C+301A |
| Min. Carton Size | L 600 × W500 × H500 mm |
| Max. Carton Size | Lunlimited × W500 × H500 mm |
| Power Supply | 220V/380V 50Hz |
| Air Pressure | 6kgf/cm2、40NL/min |
| Power Consumption | 0.9 kW |
| Tape Width | W48、60、75mm(select one) |
| Strap Specification | W9~15 mm,thk0.55~0. 8 mm |
Products & Industries Served
Working Principle
Infeed
Cartons enter the combined frame.
Sealing
Flaps are folded and tape applied.
Strapping
A PP strap is automatically fed, tensioned and sealed.
Discharge
Sealed and banded cartons are discharged.
Control
One control system synchronizes both stations.
Real Machine Images
Photographs of the actual FP500C-301A, supplied and supported directly by SunAura Packaging Machines.

Why Choose the FP500C-301A
Simple Operator Control
A clear control interface and logical layout shorten training and reduce dependence on specialist staff.
Sensors & Alarms
Missing-blank, low-consumable and overload alarms prevent empty cycles and protect the machine.
Inline Ready
The machine integrates readily with conveyors and upstream/downstream equipment in a full end-of-line system.
Space-Efficient Layout
A compact, optimized footprint saves floor space while keeping maintenance access open.
Custom Engineering
Non-standard sizes, layouts and directions are engineered to match your exact product and plant.
Rigid Industrial Build
A precision-fabricated steel frame and wear-resistant components deliver long, stable production with minimal maintenance.
Frequently Asked Questions
Yes. Both stations share a frame and control, running in a synchronized continuous cycle.
Tape 48/60/75 mm and PP strap around 9-15 mm are typical, as listed in the data.
Yes, including a U-type line configured for e-commerce order packing.
Which Case Sealer Matches Your Carton Line?
From manual taping to fully automatic fold-and-seal, match speed and carton range to the right sealer.
| Scenario | Cases / Hour | Carton Type | Recommended Type | Key Features | Budget Tier |
|---|---|---|---|---|---|
| Small shop / startup | 200-500 | Fixed-size RSC | Semi-auto case sealer (FA500) | Manual fold, top/bottom tape, 1 operator | $1k-$5k |
| Mid-volume, multi-size | 500-1,200 | Variable RSC | Auto carton sealer (center-adjust) | Auto side guides, hand fold flaps | $5k-$15k |
| High-volume 24/7 | 1,200-2,000 | Fixed-size RSC | Automatic fold-and-seal (FC500) | Auto flap fold, bottom + top tape, zero manual | $15k-$35k |
| E-commerce / random sizes | 500-1,500 | Random-size / mixed | Random-size case sealer | Auto-size detection, auto flap fold, tape cutoff | $25k-$55k |
| Heavy / oversize cartons | 200-800 | Large / heavy | Heavy-duty case sealer | Reinforced frame, 60mm tape, powered side belts | $10k-$25k |
| Pharma / food | 300-1,000 | Standard | Stainless-steel washdown | 304SS, FDA belts, IP65 | $20k-$45k |
| Integration w/ strapping | 500-1,500 | Standard | Case sealer + strapping combo | Inline sealer + inline strapper, single footprint | $20k-$40k |
| Hot-melt sealing (no tape) | 300-1,000 | Standard RSC | Hot-melt glue case sealer | Auto glue application, no tape waste | $20k-$50k |
Case Sealer Comparison
| Parameter | Semi-Auto (FA500) | Auto Fold (FC500) | Random-Size | Hot-Melt |
|---|---|---|---|---|
| Speed (cases/min) | 10-20 | 15-25 | 10-20 | 10-18 |
| Carton length | 150-600mm | 200-600mm | 150-800mm (auto) | 200-600mm |
| Carton width | 100-500mm | 150-500mm | 100-600mm (auto) | 150-500mm |
| Carton height | 80-600mm | 100-600mm | 80-700mm (auto) | 100-600mm |
| Tape width | 48-60mm | 48-60mm | 48-60mm | Hot-melt glue |
| Flap folding | Manual | Auto (bottom + top) | Auto (random) | Auto |
| Changeover | Manual (2-3 min) | Recipe (1-2 min) | Auto (<30 sec) | Recipe |
| Operators | 1 | 0 | 0 | 0 |
Related Products
Discuss your packaging line with our engineers
Send us your product dimensions and target output, and we will recommend the right machine and line configuration.




